Half-hole Design of Circuit Board
The metalized half-hole means that after drill hole (drill, gong groove), then the 2nd drilled and shaped, and finally half of the metalized hole (groove) is retained. In order to control the production of metal half-hole boards, circuit board manufacturers usually take some measures due to process problems at the intersection of metallized half-holes and non-metallized holes.
Metallized half-hole PCBs have fewer applications in various industries than PCBs. The metallized half-hole is easy to pull out the sinking copper in the hole when milling, so the scrap rate in the circuit board factory is very high.
What a metallized half-hole circuit board is?
Metallized half-hole circuit board
The production process of this type of board is processed according to the following process: a drilling (drilling, gong groove-plate plating- --External light imaging--Pattern plating--Drying--Semi-hole processing--Film removal, etching, and tin removal--Other processes--Shape
The specific metallized half-holes are handled in the following way: all metallized half-hole PCB holes must be drilled in the pattern after plating, and before etching, drill a hole at the intersection of both ends of the half hole.
1) The engineering department formulates the MI process according to the process,
2) The metal half-hole is the second-drilled half-hole drilled during the first drilling (or gong), after the image is plated, and before the etching. It must be considered whether the copper will be exposed when the gong groove is shaped, and the drilled half-hole must be moved into the unit.
3) Right hole (drilled half hole): a. Finish drilling first, then turn the board over (or mirror direction); drill the left hole. b. The purpose is to reduce the pulling of the hole copper in the half hole by the drill, resulting in the lack of hole copper.
4) The size of the drill nozzle for drilling the half hole depends on the spacing of the contour line.
5) Draw the solder mask film, use the gong as a stop point and open the window to increase the treatment.
New Blog
Copyright © 2024 ABIS CIRCUITS CO., LTD. All Rights Reserved. Power by
IPv6 network supported