other
Alaabta
Guriga PCB FABRICATION PCB adag FR4 PCB Dhumucdiisuna waxay tahay 1.6mm qiimo jaban kii ugu dambeeyay Shiinaha FR4 PCB alaab-qeybiyaha oo leh ISO standrad u qalma

Dhumucdiisuna waxay tahay 1.6mm qiimo jaban kii ugu dambeeyay Shiinaha FR4 PCB alaab-qeybiyaha oo leh ISO standrad u qalma


  • Shayga NO.:

    ABIS-FR4-013
  • Lakabka:

    4
  • Qalab:

    FR-4
  • Dhumucda looxa la dhameeyay:

    1.6mm
  • Dhumucdiisuna waxay dhammaatay:

    1oz
  • Balaadhka/Baaxadda Khadka ugu yar:

    ≥3mil (0.075mm)
  • Daloolka Min:

    ≥4mil (0.1mm)
  • Dhammaadka dusha sare:

    ENIG
  • Midabka Maaskarada Alxan:

    Madow
  • Midabka Halyeyga:

    Caddaan
  • Codsiga:

    Telecom Electronics
  • Faahfaahinta Alaabta

FR4 PCB Hordhac


--Qeexid

FR macneheedu waa "holac dib u dhiga," FR-4 (ama FR4) waa darajada NEMA ee loogu talagalay walxaha epoxy laminate ee la xoojiyay, walxo isku dhafan oo ka kooban maro fiberglass ah oo tolan oo leh binder resin epoxy taas oo ka dhigaysa mid ku habboon qaybaha elektaroonigga ah ee looxa wareegga daabacan.

- Faa'iidooyinka iyo khasaaraha FR4 PCB


  • Qalabka FR-4 waa mid caan ah sababtoo ah tayada badan ee cajiibka ah ee ka faa'iideysan kara looxyada wareegyada daabacan.Marka laga soo tago inay tahay mid la awoodi karo oo ay fududahay in lagu shaqeeyo, waa dahaye koronto oo leh awood koronto oo aad u sareysa.Intaa waxaa dheer, waa waara, qoyaan u adkaysta, heerkulka u adkaysta oo fudud.
  • FR-4 waa walxo si ballaaran loo isticmaalo, caan ku ah inta badan qiimaheeda hoose iyo xasilloonida makaanikada iyo korantada.Inkasta oo maaddadani ay leedahay faa'iidooyin ballaadhan oo lagu heli karo dhumucyo iyo cabbirro kala duwan, maaha doorashada ugu fiican ee codsi kasta, gaar ahaan codsiyada soo noqnoqda sida RF iyo naqshadaha microwave.


- Qaab-dhismeedka PCB-yada laba-geesoodka ah



PCB-yada laba-geesoodka ah waxay u badan tahay inay yihiin nooca ugu badan ee PCB-yada.Si ka duwan PCB-yada hal lakab, oo leh lakabka korantada ee hal dhinac ee looxa, PCB-ga laba-geesoodka ah wuxuu la socdaa lakabka naxaasta ah ee labada dhinac ee looxa.Wareegyada elektarooniga ah ee hal dhinac oo ka mid ah guddiga ayaa lagu xiri karaa dhinaca kale ee looxa iyadoo la kaashanayo godad (vias) laga dhex qoday looxa. Awood u lahaanshaha isgoysyada sare ilaa hoose waxay si weyn u kordhisaa dabacsanaanta naqshadeeyaha wareegga ee naqshadeynta wareegyada waxayna isku daydaa inay si weyn u korodho cufnaanta wareegga.



Xagee bay ka yimaadaan walxaha resin ee ABIS?


Badi iyaga oo ka socda Shengyi Technology Co., Ltd. (SYTECH), oo ah shirkadda labaad ee ugu weyn adduunka ee CCL marka loo eego mugga iibka, laga bilaabo 2013 ilaa 2017. Waxaan aasaasnay ​​xiriir iskaashi oo muddo dheer ah. tan iyo 2006. Qalabka resin FR4 ( Model S1000-2, S1141, S1165, S1600 ) Inta badan waxaa loo isticmaalaa samaynta looxyada wareegyada daabacan ee hal iyo laba-dhinac leh iyo sidoo kale looxyada lakabyada badan.Halkan waxaa ku qoran faahfaahinta tixraacaada.


  • Loogu talagalay FR-4: Sheng Yi, King Board, Nan Ya, Polycard, ITEQ, ISOLA
  • Loogu talagalay CEM-1 & CEM 3: Sheng Yi, King Board
  • Soo noqnoqoshada Sare: Sheng Yi
  • Daawooyinka UV: Tamura, Chang Xing (* La heli karo midabka: Cagaaran) Alxanka Hal Side
  • Sawirka dareeraha ah: Tao Yang, iska caabin (filimka qoyan)
  • Chuan Yu (* Midabada la heli karo: Cadaan, Jaalle la qiyaasi karo Alxanka, Purple, Cas, Buluug, Cagaaran, Madow)



Awood waxsoosaar PCB adag


ABIS waxay khibrad u leedahay samaynta qalab gaar ah PCB adag, sida: CEM-1/CEM-3, PI, High Tg, Rogers, PTEF, Alu/Cu Base iwm. Hoos waxaa ah dulmar kooban FYI.



Shayga

Gaar ahaan.

Lakabyo

1 ~ 20

Dhumucda looxa

0.1mm-8.0mm

Qalab

FR-4, CEM-1/CEM-3, PI, High Tg, Rogers, PTEF, Alu/Cu Base, iwm

Cabbirka guddiga ugu sarreeya

600mm×1200mm

Cabbirka godka Min

0.1mm

Balaadhka khadka Min Min

3mil (0.075mm)

Dulqaadka dulucda guddiga

士0.10mm

Dhumucda lakabka dahaarka

0.075mm--5.00mm

Lakabka ka baxay Dhumucda Copper

18um--350um

Daloolka Qodista ( Makaanikada)

17um--175um

Daloolka Dhamaystir (Mechanical)

0.10mm--6.30mm

Dulqaadka Dhexroorka (Mechanical)

0.05mm

Diiwangelinta ( Makaanikada)

0.075mm

Saamiga dhinaca

16:1

Nooca Maaskarada Alxan

LPI

SMT Mini.Ballaca Maaskarada Alxan

0.075mm

MiniNadiifinta Maaskarada Alxan

0.05mm

Dhererka godka

0.25mm--0.60mm

Dulqaadashada Xakamaynta Culayska

士10%

Dhammaadka dusha sare

ENIG, OSP, HASL, Chem.Tin/Sn, Dahab Fiish ah

Soldermask

Cagaar/Jaalle/Madaw/Cad/Casaan/Buluug

Shaashada xariirta

Casaan/Jaalle/Madaw/ Cadaan

Shahaado

UL, ISO 9001, ISO14001, IATF16949

Codsi Gaar ah

dalool indho la'aan, far dahab ah, BGA, khad kaarboon, maaskaro la arki karo, habka VIP, dajinta cidhifka, godadka nuska ah

Kaabayaasha agabka

Shengyi, ITEQ, Taiyo, iwm.

Xidhmada guud

Vacuum+Cartoon



Habka Waxsoosaarka PCB-daaha badan



  • Nidaamku wuxuu ka bilaabmaa naqshadaynta Qaabka PCB-ga iyadoo la adeegsanayo barnaamij kasta oo PCB naqshadeynta / CAD Tool ( Proteus, Eagle, Ama CAD ).
  • Dhammaan tallaabooyinka soo haray waa Habka Wax-soo-saarka ee Guddiga Wareegga Daabacan ee Adag waxay la mid yihiin PCB-ga Hal dhinac ah ama PCB-ga laba-geesoodka ah ama PCB-da lakabka badan.





PCB-lakab badan Waqtiga Hogaaminta


Qaybta Q/T wakhtiga hogaaminta Waqtiga Hoggaanka caadiga ah Wax-soo-saarka guud
Laba-dhinac 24 saac 3-4 maalmood oo shaqo ah 8-15 maalmood oo shaqo
4 Lakabyo 48 saac 3-5 maalmood oo shaqo 10-15 maalmood oo shaqo
6 Lakabyo 72 saac 3-6 maalmood oo shaqo ah 10-15 maalmood oo shaqo
8 Lakabyo 96 saac 3-7 maalmood oo shaqo 14-18 maalmood oo shaqo
10 Lakab 120 saac 3-8 maalmood oo shaqo ah 14-18 maalmood oo shaqo
12 lakab 120 saac 3-9 maalmood oo shaqo 20-26 maalmood oo shaqo
14 Lakab 144 saac 3-10 maalmood oo shaqo ah 20-26 maalmood oo shaqo
16-20 lakab Waxay kuxirantahay shuruudaha gaarka ah
20+ Lakab Waxay kuxirantahay shuruudaha gaarka ah


Sidee ABIS uga shaqaynaysaa arrimaha wax-soo-saarka ee FR4 PCB?


- Diyaarinta godka

Ka-saarista qashinka si taxadar leh & hagaajinta cabbirada mishiinka: ka hor inta aanad ku dhejin naxaas, abis waxay fiiro gaar ah u yeelataa dhammaan godadka fr4 pcb ee lagu daweeyey si looga saaro qashinka, cilladaha dusha sare, iyo smear epoxy, godadka nadiifka ah waxay xaqiijinayaan in dahaadhku si guul leh ugu dheggan yahay derbiyada daloolka .sidoo kale, horraantii habka, cabbirada mishiinka daloolka ayaa si sax ah loo hagaajiyaa.


- S Uurface Diyaarinta

Si taxaddar leh uga-hortagga: Shaqaalaheenna tignoolajiyada khibradda leh waxay ogaan doonaan waqti ka hor in habka kaliya ee looga fogaado natiijada xun ay tahay in la saadaaliyo baahida loo qabo maaraynta gaarka ah iyo in la qaado tillaabooyinka ku habboon si loo hubiyo in habka loo sameeyay si taxadar leh oo sax ah.


- T Heerarka Balaadhinta Dhirta

Caadaystay wax ka qabashada walxaha kala duwan, abis wuxuu awood u yeelan doonaa inuu falanqeeyo isku dhafka si loo hubiyo inay ku habboon tahay.ka dib ilaalinta isku halaynta muddada dheer ee cte (coefficient of balaadhinta kulaylka), iyada oo cte hoose, ay u badan tahay in ay u yar tahay ee ku dhejisan godadka waa inay ku guuldareystaan ​​dabacsanaanta soo noqnoqda ee naxaasta kaas oo sameeya isku xirka lakabka gudaha.


- Cabbiraadda

Xakamaynta Abis wareegga wareegga waxaa lagu qiyaasay boqolleyda la yaqaan iyadoo la filayo khasaarahan si ay lakabyadu ugu soo noqdaan cabbirkooda sidii loo qaabeeyey ka dib marka wareegga lamination la dhammeeyo.sidoo kale, iyadoo la adeegsanayo talooyinka cabbiraadda aasaasiga ah ee saaraha laminateerka oo ay weheliso xogta habraaca tirakoobka ee guriga dhexdiisa, si loo garaaco qodobbada cabbirka ee socon doona muddo ka dib gudaha deegaanka wax soo saarka ee gaarka ah.

 

- Makiinada

Marka la gaaro wakhtiga lagu dhisayo pcb-gaaga, abis iska hubi inaad dooratay inaad haysato qalabka saxda ah iyo waayo-aragnimada si aad si sax ah ugu soo saarto tijaabada koowaad.






Baakadaha & Bixinta


Shirkadda ABIS CIRCUITS kaliya iskuma dayayso inay macaamiisha siiso badeeco wanaagsan, laakiin sidoo kale fiiro gaar ah u yeelo bixinta xirmo dhammaystiran oo ammaan ah.Sidoo kale, waxaan u diyaarinaa qaar ka mid ah adeegyada gaarka ah dhammaan dalabyada.


- Baakadaha caadiga ah:

  • PCB: Shandad xiran, bacaha lidka-static, kartoon ku habboon.
  • PCBA: Bacaha xumbo lidka ku ah, bacaha iska caabinta, kartoon ku haboon.
  • Baakadaha Habboon: kartoonka ka baxsan waxaa lagu daabici doonaa magaca ciwaanka macmiilka, calaamadee, macmiilku wuxuu u baahan yahay inuu caddeeyo meesha uu u socdo iyo macluumaadka kale.

-Tallooyinka gaarsiinta:

  • Xirmooyinka yaryar, waxaan kugula talineynaa inaad doorato byExpress ama adeegga DDU waa habka ugu dhaqsaha badan.
  • Xirmooyinka culus, xalka ugu fiican waa gaadiidka badda.



Shuruudaha Ganacsiga
- Shuruudaha keenista la aqbalay
FOB, CIF, EXW, FCA, CPT, DDP, DDU, gaarsiinta degdega ah, DAF


-- Lacagta Lacag-bixinta La Aqbalay
USD, EUR, CNY.


- Nooca Lacag-bixinta La Aqbalay
T/T, PayPal, Western Union.


Xigasho ABIS

Si loo xaqiijiyo xigasho sax ah, hubi inaad ku darto macluumaadka soo socda mashruucaaga:

  • Buuxi faylasha GERBER oo ay ku jiraan liiska BOM
  • Tirada
  • Wakhtiga beddel
  • Shuruudaha Gudbinta
  • Shuruudaha Agabka
  • Dhamaystir shuruudaha
Qiimahaaga gaarka ah waxaa lagu soo gudbin doonaa kaliya 2-24 saacadood, iyadoo ku xiran kakanaanta naqshadeynta.

Fadlan nala socodsii wixii dan ah!

ABIS waxay danaysaa dalabkaaga kasta xitaa 1 gabal!



Fariin ku dhaaftid

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Xuquuqda daabacaadda © 2023 ABIS CIRCUITS CO., LTD.Dhammaan Xuquuqaha Way Dhawrsan Yihiin. Awood by

Shabakadda IPV6 waa la taageeray

sare

Fariin ku dhaaftid

Fariin ku dhaaftid

    Haddii aad xiisaynayso alaabtayada oo aad rabto inaad ogaato faahfaahin dheeraad ah, fadlan halkan fariin ku dhaaf, waxaanu kuugu jawaabi doonaa sida ugu dhakhsaha badan ee aan awoodno.

  • #
  • #
  • #
  • #
    Dib u cusboonaysii sawirka