other
Ngwaahịa
Ụlọ PCB ọgbakọ Ngwaahịa PCBA → Ọkachamara ọkwa Myofascial Impact Instrument Control Board Custom-Mee PCBA

Ọkachamara ọkwa Myofascial Impact Instrument Control Board Custom-Mee PCBA

  • Ihe NO.

    PCB Mgbakọ na-arụ ọrụ
  • oyi akwa:

  • Ihe:

  • Ọkpụrụkpụ bọọdụ Emechara:

  • Ọkpụkpụ ọla kọpa emechara:

  • Obosara/Oghere Min Line:

  • Min oghere:

  • Nchacha elu:

  • Agba mkpuchi ihe na-ere ihe:

  • Agba Legend:

  • Ngwa:

  • Nkọwapụta:

    Ahaziri ya na onye ahịa Gerber File&BOM
  • Nkọwa ngwaahịa

Okwu Mmalite PCBA


Ụlọ ọrụ ABIS CIRCUITS na-ebuga ọrụ, ọ bụghị naanị ngwaahịa.Anyị na-enye ihe ngwọta, ọ bụghị naanị ngwongwo.

Site na mmepụta PCB, ihe ndị na-azụrụ ihe na ihe ndị ahụ na-agbakọta.Ọ gụnyere:

  • Omenala PCB
  • PCB osise / imewe dị ka schematic eserese gị
  • PCB nrụpụta
  • Ịnweta akụrụngwa
  • PCB Mgbakọta
  • PCBA 100% ule

Uru Anyị

  • Igwe eji euipment dị elu dị elu nke nwere ike hazie ihe dịka 25,000 SMD kwa elekere.
  • Ike ọkọnọ dị elu nke ọma 60K Sqm kwa ọnwa-Na-enye obere olu na mmepụta PCB na-achọ, na-arụpụta nnukwu ihe.
  • Ndị otu injinia ọkachamara-40 injinia na ụlọ akụrụngwa nke ha, siri ike na OEM.Na-enye nhọrọ abụọ dị mfe: Omenala na Ọkọlọtọ-Ọmụma omimi nke IPC Class II na III Standards

Anyị na-enye ndị ahịa chọrọ ka anyị kpọkọta PCB n'ime PCBA, gụnyere ihe atụ, ọrụ NPI, obere na ọkara olu.Anyị nwekwara ike iwepụta akụrụngwa niile maka ọrụ mgbakọ PCB gị.Ndị injinia anyị na ndị otu na-egwupụta ihe nwere ahụmịhe bara ụba na agbụ ọkọnọ na ụlọ ọrụ EMS, nwere ihe ọmụma miri emi na mgbakọ SMT na-enye ohere iji dozie nsogbu mmepụta niile.Ọrụ anyị na-efu ọnụ, na-agbanwe agbanwe, yana ntụkwasị obi.Anyị nwere afọ ojuju ndị ahịa n'ofe ọtụtụ ụlọ ọrụ gụnyere ahụike, ụlọ ọrụ mmepụta ihe, ụgbọ ala na ngwa eletrọnịkị ndị ahịa.


Ike PCBA

1

Mgbakọ SMT gụnyere mgbakọ BGA

2

ibe SMD anabatara: 0204, BGA, QFP, QFN, TSOP

3

Akụkụ akụkụ: 0.2-25mm

4

Nkwakọ ngwaahịa: 0204

5

Obere anya n'etiti BGA: 0.25-2.0mm

6

Nha BGA: 0.1-0.63mm

7

Oghere QFP nkeji: 0.35mm

8

Nha mgbakọ mini: (X*Y): 50*30mm

9

Nha mgbakọ kacha elu: (X*Y): 350*550mm

10

Nhọrọ-nkenke ziri ezi: ±0.01mm

11

Ike ntinye: 0805, 0603, 0402

12

Ọgụgụ ntụtụ dị elu dabara adaba dị

13

Ike SMT kwa ụbọchị: 80,000 isi

- - Ike - SMT

Ahịrị
9 (5 Yamaha, 4KME)
Ike
52 nde ntinye kwa ọnwa
Oke bọọdụ kacha
457*356mm.(18"X14")
Nha akụkụ akụkụ
0201-54 sq.mm (0.084 sq.inch), ogologo njikọ, CSP, BGA, QFP
Ọsọ
0.15 sk/chip,0.7 sk/QFP

-Ikike - PTH

Ahịrị
2
Ogologo bọọdụ kacha
400 mm
Ụdị
Ifufe abụọ
Ọkwa Pbs
Nkwado ahịrị na-enweghị ndu
Oke okpomọkụ
399 Celsius C
fesa flux
mgbakwunye
Tupu ọkụ
3


Usoro mmepụta

Ịnata ihe → IQC → Akụrụngwa → Ihe na SMT → SMT Line Loading → Solder Paste/Glue Printing → Chip Mount → Reflow → 100% Visual Inspection → Automated Optical Inspection (AOI) → SMT QC Sampling → SMTTH → PMT → PYMEX Ngwunye ahịrị → Plated Site na oghere → Igwe na-ere mmiri → metụ aka → 100% nlele anya → PTH QC Sampling → In-Circuit Test (ICT)


Njikwa ogo

Nnwale AOI

Nyochaa maka tapawa solder

Na-enyocha ihe mejupụtara ruo 0201

Nyochaa ihe ndị na-efu efu, nkwụsị, akụkụ na-ezighi ezi, polarity

Nyocha X-ray

X-Ray na-enye nleba anya dị elu nke:

BGAs/Micro BGAs/Chip scale packages/Bare mbadamba

Nnwale n'ime okirikiri
A na-ejikarị Nnwale In-Circuit eme ihe yana njikọ AOI na-ebelata ntụpọ arụ ọrụ nke nsogbu akụrụngwa kpatara.
Nnwale mgbake
Nnwale ọrụ dị elu
Mmemme Ngwaọrụ Flash
Nnwale arụ ọrụ

  • Nyocha mbata IOC
  • Nyocha SPI solder mado
  • Nyocha AOI n'ịntanetị
  • Nyocha akụkọ mbụ SMT
  • Ntụle mpụga
  • Nyocha ịgbado ọkụ X-RAY
  • Ngwaọrụ BGA rụgharịa ọrụ
  • Nyocha QA
  • Ụlọ nkwakọba ihe mgbochi static na mbupu


Ngwa

  • Ngalaba nzikọrịta ozi
  • Njikwa mmepụta ihe
  • Ngwa ahụike
  • Ngalaba ụgbọ ala
  • Ngwaọrụ netwọkụ
  • Njikwa ọnụ ụzọ ámá


Nkwakọ ngwaahịa & nnyefe

Ụlọ ọrụ ABIS CIRCUITS abụghị naanị na-agbalị ịnye ndị ahịa ngwaahịa dị mma, kamakwa ṅaa ntị n'inye ngwugwu zuru oke na nchekwa.Ọzọkwa, anyị na-akwado ụfọdụ ọrụ ahaziri maka iwu niile.


- Nkwakọ ngwaahịa nkịtị:

  • PCB: Akpa edochiri, akpa mgbochi static, katọn dabara adaba.
  • PCBA: Akpa ụfụfụ antistatic, akpa mgbochi static, katọn dabara adaba.
  • Nkwakọ ngwaahịa ahaziri ahazi: Katọn dị n'èzí ga-ebipụta aha adreesị ndị ahịa, akara, onye ahịa kwesịrị ịkọwa ebe ebe na ozi ndị ọzọ.

- Atụmatụ nnyefe:

  • Maka obere ngwugwu, anyị na-adụ ọdụ ịhọrọ site Express ma ọ bụ ọrụ DDU bụ ụzọ kachasị ngwa ngwa.
  • Maka ngwugwu dị arọ, ngwọta kachasị mma bụ njem ụgbọ mmiri.


Usoro azụmahịa
- Usoro nnyefe anabatara
FOB, CIF, EXW, FCA, CPT, DDP, DDU, Nnyefe Express, DAF


-- Ego ịkwụ ụgwọ anabatara
USD, EUR, CNY.


- Ụdị ịkwụ ụgwọ anabatara
T/T, PayPal, Western Union.


Nkwupụta sitere na ABIS

Iji hụ na nkwupụta ziri ezi, jide n'aka na itinye ozi ndị a maka ọrụ gị:

  • Mezue faịlụ GERBER gụnyere ndepụta BOM
  • Ọnụọgụ
  • Tụgharịa oge
  • Achọrọ panelization
  • Ihe achọrọ
  • Mechaa chọrọ
A ga-ebuga ngụ aha omenala gị n'ime naanị awa 2-24, dabere na mgbagwoju anya imewe.

Biko mee ka anyị mara maka ọdịmma ọ bụla!

ABIS na-elekọta iwu gị ọ bụla ọbụlagodi otu ibe!



Hapụ ozi

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Ngwaahịa ndị emetụtara
Turn-key printed circuit board assembly
Ọrụ mgbakọ sekit e biri ebi na-atụgharị-igodo

Ọrụ PCBA Okwu Mmalite ABIS CIRCUITS Company na-ebuga ọrụ, ọ bụghị naanị ngwaahịa.Anyị na-enye ihe ngwọta, ọ bụghị naanị ngwongwo.Site na mmepụta PCB, ihe ndị na-azụrụ ihe na ihe ndị ahụ na-agbakọta.Gụnyere: PCB Custom PCB eserese / imewe dị ka eserese schematic gị PCB nrụpụta Component sourcing PCB Assemble PCBA 100% nwalee Uru anyị Euipment dị elu-oke ọsọ Pick na ebe igwe nwere ike hazie ihe dị ka 25,000 SMD components kwa elekere Ikike ọkọnọ dị elu 60K Sqm kwa ọnwa-Na-enye obere olu na mmepụta PCB chọrọ, na-arụpụta nnukwu mmepụta ndị ọkachamara injinia-40 injinia na ụlọ ọrụ nke ha, siri ike na OEM.Na-enye abụọ dị mfe nhọrọ: omenala na Standard-Na-omimi ihe ọmụma nke IPC Class II na III Standards Anyị na-enye a keukwu turn-igodo EMS ọrụ ndị ahịa chọrọ ka anyị kpọkọta PCB n'ime PCBA, gụnyere prototypes, NPI oru ngo, obere na ọkara. olu.Anyị nwekwara ike iwepụta akụrụngwa niile maka ọrụ mgbakọ PCB gị.Ndị injinia anyị na ndị otu na-egwupụta ihe nwere ahụmịhe bara ụba na agbụ ọkọnọ na ụlọ ọrụ EMS, nwere ihe ọmụma miri emi na mgbakọ SMT na-enye ohere iji dozie nsogbu mmepụta niile.Ọrụ anyị na-efu ọnụ, na-agbanwe agbanwe, yana ntụkwasị obi.Anyị nwere afọ ojuju ndị ahịa n'ofe ọtụtụ ụlọ ọrụ gụnyere ahụike, ụlọ ọrụ mmepụta ihe, ụgbọ ala na ngwa eletrọnịkị ndị ahịa.PCBA ike 1 SMT mgbakọ gụnyere BGA mgbakọ 2 Nabata SMD ibe: 0204, BGA, QFP, QFN, TSOP 3 Akụkụ elu: 0.2-25mm 4 Min mbukota: 0204 5 Min anya n'etiti BGA : 0.25-2.0mm 6 Min BGA size: 0. -0.63mm 7 Min QFP oghere: 0.35mm 8 Min mgbakọ size: (X * Y): 50 * 30mm 9 Max mgbakọ size: (X * Y): 350*550mm 10 Nhọrọ-nkwadebe nkenke: ± 0.01mm 11 Ikike ntinye : 0805, 0603, 0402 12 High pin count press fit dị 13 SMT ikike kwa ụbọchị: 80,000 isi - ike - SMT Lines 9 (5 Yamaha,4KME) Ikike 52 nde placements kwa ọnwa Max Board Size 457*356mm.(18" X14”) Min akụrụngwa size 0201-54 sq.mm.(0.084 sq.inch), ogologo njikọ, CSP, BGA, QFP Speed ​​0.15 sec / mgbawa,0.7 sec/QFP -Ike - PTH ahịrị 2 Max osisi obosara 400 mm Ụdị Dual wave Pbs status Lead-free line support Max temp 399 degrees C Spray flux add-on Pre-heat 3 Production Processes Material Anata → IQC → Stock → Material to SMT → SMT Line Loading → Solder Paste/Glue Printing → Chip Mount → Reflow → 100% Nleba anya → Nyocha anya na-akpaghị aka (AOI) → SMT QC Sampling → SMT Stock → Akụrụngwa na PTH → PTH Line Loading → Plated Site na oghere → Wave Soldering → Metụ elu → 100% Nleba anya → 100% Nleba anya → Pait → PTH QC Sampcu Nnwale (ICT) → Mgbakọ ikpeazụ → Nnwale arụ ọrụ (FCT) → Mbukota → OQC Sampling → Njikwa ogo mbupu AOI Nlele nyocha maka ihe na-ere ihe nleba anya ruo 0201 Nyocha maka ihe ndị na-efu, nkwụghachi, akụkụ ezighi ezi, nyocha X-Ray polarity X. -Ray na-enye nlebanya dị elu nke: ngwugwu BGAs/Micro BGAs/Chip scale /Bare Boards In-Circuit Testing In-Circuit A na-ejikarị ya na AOI na-ebelata ntụpọ arụ ọrụ kpatara site na nsogbu akụrụngwa.Nnwale ike elu ule ọrụ dị elu Nnwale ngwa ngwa ngwa ngwa ngwa ngwa ule nyocha IOC na-abata nyocha SPI solder mado nyocha Online AOI nyocha SMT isiokwu mbụ nyocha mpụga X-RAY-welding nyocha BGA ngwaọrụ rework QA nyocha Anti-static nkwakọba ihe na mbupu Ngwa nkwurịta okwu nkeji ụlọ ọrụ njikwa. Ngwaọrụ Medical Automotive Units Network Devices Gateway Control Packaging & Delivery ABIS CIRCUITS Company abụghị naanị na-agbalị inye ndị ahịa ngwaahịa dị mma, kamakwa ṅaa ntị n'inye ngwugwu zuru oke na nchekwa.Ọzọkwa, anyị na-akwado ụfọdụ ọrụ ahaziri maka iwu niile.- Nkwakọ ngwaahịa a na-ahụkarị: PCB: akpa akara, akpa mgbochi static, katọn dabara adaba.PCBA: Akpa ụfụfụ antistatic, akpa mgbochi static, katọn dabara adaba.Nkwakọ ngwaahịa ahaziri ahazi: Katọn dị n'èzí ga-ebipụta aha adreesị ndị ahịa, akara, onye ahịa kwesịrị ịkọwa ebe ebe na ozi ndị ọzọ.Atụmatụ nnyefe: Maka obere ngwugwu, anyị na-adụ ọdụ ịhọrọ site Express ma ọ bụ ọrụ DDU bụ ụzọ kachasị ngwa ngwa.Maka ngwugwu dị arọ, ngwọta kachasị mma bụ njem ụgbọ mmiri.Usoro azụmahịa -Okwu nnyefe anabatara FOB, CIF, EXW, FCA, CPT, DDP, DDU, Nnyefe ngwa ngwa, DAF --Ụgwọ ego anabatara USD, EUR, CNY.-Ụdị ịkwụ ụgwọ anabatara T/T, PayPal, Western Union.Nkwupụta sitere na ABIS Iji hụ na ọnụahịa ziri ezi, jide n'aka na itinye ozi ndị a maka ọrụ gị: Faịlụ GERBER zuru ezu gụnyere ndepụta BOM ọnụ ọgụgụ Tụgharịa oge Panelization Requirements Materials Requirements Mezue ihe ndị a chọrọ ka a ga-ebunye nrụtụ aka omenala gị n'ime naanị awa 2-24, dabere. na mgbagwoju anya imewe.Biko mee ka anyị mara maka ọdịmma ọ bụla!ABIS na-eche echiche gị niile

Turn-key printed circuit board assembly
Omenala eletrọnịkị Circuit Board Turnkey Ọrụ Multilayer Pcba Mgbakọ PCb emeputa

Ọrụ PCBA Okwu Mmalite ABIS CIRCUITS Company na-ebuga ọrụ, ọ bụghị naanị ngwaahịa.Anyị na-enye ihe ngwọta, ọ bụghị naanị ngwongwo.Site na mmepụta PCB, ihe ndị na-azụrụ ihe na ihe ndị ahụ na-agbakọta.Gụnyere: PCB Custom PCB eserese / imewe dị ka eserese schematic gị PCB nrụpụta Component sourcing PCB Assemble PCBA 100% nwalee Uru anyị Euipment dị elu-oke ọsọ Pick na ebe igwe nwere ike hazie ihe dị ka 25,000 SMD components kwa elekere Ikike ọkọnọ dị elu 60K Sqm kwa ọnwa-Na-enye obere olu na mmepụta PCB chọrọ, na-arụpụta nnukwu mmepụta ndị ọkachamara injinia-40 injinia na ụlọ ọrụ nke ha, siri ike na OEM.Na-enye abụọ dị mfe nhọrọ: omenala na Standard-Na-omimi ihe ọmụma nke IPC Class II na III Standards Anyị na-enye a keukwu turn-igodo EMS ọrụ ndị ahịa chọrọ ka anyị kpọkọta PCB n'ime PCBA, gụnyere prototypes, NPI oru ngo, obere na ọkara. olu.Anyị nwekwara ike iwepụta akụrụngwa niile maka ọrụ mgbakọ PCB gị.Ndị injinia anyị na ndị otu na-egwupụta ihe nwere ahụmịhe bara ụba na agbụ ọkọnọ na ụlọ ọrụ EMS, nwere ihe ọmụma miri emi na mgbakọ SMT na-enye ohere iji dozie nsogbu mmepụta niile.Ọrụ anyị na-efu ọnụ, na-agbanwe agbanwe, yana ntụkwasị obi.Anyị nwere afọ ojuju ndị ahịa n'ofe ọtụtụ ụlọ ọrụ gụnyere ahụike, ụlọ ọrụ mmepụta ihe, ụgbọ ala na ngwa eletrọnịkị ndị ahịa.PCBA ike 1 SMT mgbakọ gụnyere BGA mgbakọ 2 Nabata SMD ibe: 0204, BGA, QFP, QFN, TSOP 3 Akụkụ elu: 0.2-25mm 4 Min mbukota: 0204 5 Min anya n'etiti BGA : 0.25-2.0mm 6 Min BGA size: 0. -0.63mm 7 Min QFP oghere: 0.35mm 8 Min mgbakọ size: (X * Y): 50 * 30mm 9 Max mgbakọ size: (X * Y): 350*550mm 10 Nhọrọ-nkwadebe nkenke: ± 0.01mm 11 Ikike ntinye : 0805, 0603, 0402 12 High pin count press fit dị 13 SMT ikike kwa ụbọchị: 80,000 isi - ike - SMT Lines 9 (5 Yamaha,4KME) Ikike 52 nde placements kwa ọnwa Max Board Size 457*356mm.(18" X14”) Min akụrụngwa size 0201-54 sq.mm.(0.084 sq.inch), ogologo njikọ, CSP, BGA, QFP Speed ​​0.15 sec / mgbawa,0.7 sec/QFP -Ike - PTH ahịrị 2 Max osisi obosara 400 mm Ụdị Dual wave Pbs status Lead-free line support Max temp 399 degrees C Spray flux add-on Pre-heat 3 Production Processes Material Anata → IQC → Stock → Material to SMT → SMT Line Loading → Solder Paste/Glue Printing → Chip Mount → Reflow → 100% Nleba anya → Nyocha anya na-akpaghị aka (AOI) → SMT QC Sampling → SMT Stock → Akụrụngwa na PTH → PTH Line Loading → Plated Site na oghere → Wave Soldering → Metụ elu → 100% Nleba anya → 100% Nleba anya → Pait → PTH QC Sampcu Nnwale (ICT) → Mgbakọ ikpeazụ → Nnwale arụ ọrụ (FCT) → Mbukota → OQC Sampling → Njikwa ogo mbupu AOI Nlele nyocha maka ihe na-ere ihe nleba anya ruo 0201 Nyocha maka ihe ndị na-efu, nkwụghachi, akụkụ ezighi ezi, nyocha X-Ray polarity X. -Ray na-enye nlebanya dị elu nke: ngwugwu BGAs/Micro BGAs/Chip scale /Bare Boards In-Circuit Testing In-Circuit A na-ejikarị ya na AOI na-ebelata ntụpọ arụ ọrụ kpatara site na nsogbu akụrụngwa.Nnwale ike elu ule ọrụ dị elu Nnwale ngwa ngwa ngwa ngwa ngwa ngwa ule nyocha IOC na-abata nyocha SPI solder mado nyocha Online AOI nyocha SMT isiokwu mbụ nyocha mpụga X-RAY-welding nyocha BGA ngwaọrụ rework QA nyocha Anti-static nkwakọba ihe na mbupu Ngwa nkwurịta okwu nkeji ụlọ ọrụ njikwa. Ngwaọrụ Medical Automotive Units Network Devices Gateway Control Packaging & Delivery ABIS CIRCUITS Company abụghị naanị na-agbalị inye ndị ahịa ngwaahịa dị mma, kamakwa ṅaa ntị n'inye ngwugwu zuru oke na nchekwa.Ọzọkwa, anyị na-akwado ụfọdụ ọrụ ahaziri maka iwu niile.- Nkwakọ ngwaahịa a na-ahụkarị: PCB: akpa akara, akpa mgbochi static, katọn dabara adaba.PCBA: Akpa ụfụfụ antistatic, akpa mgbochi static, katọn dabara adaba.Nkwakọ ngwaahịa ahaziri ahazi: Katọn dị n'èzí ga-ebipụta aha adreesị ndị ahịa, akara, onye ahịa kwesịrị ịkọwa ebe ebe na ozi ndị ọzọ.Atụmatụ nnyefe: Maka obere ngwugwu, anyị na-adụ ọdụ ịhọrọ site Express ma ọ bụ ọrụ DDU bụ ụzọ kachasị ngwa ngwa.Maka ngwugwu dị arọ, ngwọta kachasị mma bụ njem ụgbọ mmiri.Usoro azụmahịa -Okwu nnyefe anabatara FOB, CIF, EXW, FCA, CPT, DDP, DDU, Nnyefe ngwa ngwa, DAF --Ụgwọ ego anabatara USD, EUR, CNY.-Ụdị ịkwụ ụgwọ anabatara T/T, PayPal, Western Union.Nkwupụta sitere na ABIS Iji hụ na ọnụahịa ziri ezi, jide n'aka na itinye ozi ndị a maka ọrụ gị: Faịlụ GERBER zuru ezu gụnyere ndepụta BOM ọnụ ọgụgụ Tụgharịa oge Panelization Requirements Materials Requirements Mezue ihe ndị a chọrọ ka a ga-ebunye nrụtụ aka omenala gị n'ime naanị awa 2-24, dabere. na mgbagwoju anya imewe.Biko mee ka anyị mara maka ọdịmma ọ bụla!ABIS na-eche echiche gị niile

Turn-key printed circuit board assembly
SMT sekit osisi emeputa omenala eletrọnịkị mgbakọ pcba

Ọrụ PCBA Okwu Mmalite ABIS CIRCUITS Company na-ebuga ọrụ, ọ bụghị naanị ngwaahịa.Anyị na-enye ihe ngwọta, ọ bụghị naanị ngwongwo.Site na mmepụta PCB, ihe ndị na-azụrụ ihe na ihe ndị ahụ na-agbakọta.Gụnyere: PCB Custom PCB eserese / imewe dị ka eserese schematic gị PCB nrụpụta Component sourcing PCB Assemble PCBA 100% nwalee Uru anyị Euipment dị elu-oke ọsọ Pick na ebe igwe nwere ike hazie ihe dị ka 25,000 SMD components kwa elekere Ikike ọkọnọ dị elu 60K Sqm kwa ọnwa-Na-enye obere olu na mmepụta PCB chọrọ, na-arụpụta nnukwu mmepụta ndị ọkachamara injinia-40 injinia na ụlọ ọrụ nke ha, siri ike na OEM.Na-enye abụọ dị mfe nhọrọ: omenala na Standard-Na-omimi ihe ọmụma nke IPC Class II na III Standards Anyị na-enye a keukwu turn-igodo EMS ọrụ ndị ahịa chọrọ ka anyị kpọkọta PCB n'ime PCBA, gụnyere prototypes, NPI oru ngo, obere na ọkara. olu.Anyị nwekwara ike iwepụta akụrụngwa niile maka ọrụ mgbakọ PCB gị.Ndị injinia anyị na ndị otu na-egwupụta ihe nwere ahụmịhe bara ụba na agbụ ọkọnọ na ụlọ ọrụ EMS, nwere ihe ọmụma miri emi na mgbakọ SMT na-enye ohere iji dozie nsogbu mmepụta niile.Ọrụ anyị na-efu ọnụ, na-agbanwe agbanwe, yana ntụkwasị obi.Anyị nwere afọ ojuju ndị ahịa n'ofe ọtụtụ ụlọ ọrụ gụnyere ahụike, ụlọ ọrụ mmepụta ihe, ụgbọ ala na ngwa eletrọnịkị ndị ahịa.PCBA ike 1 SMT mgbakọ gụnyere BGA mgbakọ 2 Nabata SMD ibe: 0204, BGA, QFP, QFN, TSOP 3 Akụkụ elu: 0.2-25mm 4 Min mbukota: 0204 5 Min anya n'etiti BGA : 0.25-2.0mm 6 Min BGA size: 0. -0.63mm 7 Min QFP oghere: 0.35mm 8 Min mgbakọ size: (X * Y): 50 * 30mm 9 Max mgbakọ size: (X * Y): 350*550mm 10 Nhọrọ-nkwadebe nkenke: ± 0.01mm 11 Ikike ntinye : 0805, 0603, 0402 12 High pin count press fit dị 13 SMT ikike kwa ụbọchị: 80,000 isi - ike - SMT Lines 9 (5 Yamaha,4KME) Ikike 52 nde placements kwa ọnwa Max Board Size 457*356mm.(18" X14”) Min akụrụngwa size 0201-54 sq.mm.(0.084 sq.inch), ogologo njikọ, CSP, BGA, QFP Speed ​​0.15 sec / mgbawa,0.7 sec/QFP -Ike - PTH ahịrị 2 Max osisi obosara 400 mm Ụdị Dual wave Pbs status Lead-free line support Max temp 399 degrees C Spray flux add-on Pre-heat 3 Production Processes Material Anata → IQC → Stock → Material to SMT → SMT Line Loading → Solder Paste/Glue Printing → Chip Mount → Reflow → 100% Nleba anya → Nyocha anya na-akpaghị aka (AOI) → SMT QC Sampling → SMT Stock → Akụrụngwa na PTH → PTH Line Loading → Plated Site na oghere → Wave Soldering → Metụ elu → 100% Nleba anya → 100% Nleba anya → Pait → PTH QC Sampcu Nnwale (ICT) → Mgbakọ ikpeazụ → Nnwale arụ ọrụ (FCT) → Mbukota → OQC Sampling → Njikwa ogo mbupu AOI Nlele nyocha maka ihe na-ere ihe nleba anya ruo 0201 Nyocha maka ihe ndị na-efu, nkwụghachi, akụkụ ezighi ezi, nyocha X-Ray polarity X. -Ray na-enye nlebanya dị elu nke: ngwugwu BGAs/Micro BGAs/Chip scale /Bare Boards In-Circuit Testing In-Circuit A na-ejikarị ya na AOI na-ebelata ntụpọ arụ ọrụ kpatara site na nsogbu akụrụngwa.Nnwale ike elu ule ọrụ dị elu Nnwale ngwa ngwa ngwa ngwa ngwa ngwa ule nyocha IOC na-abata nyocha SPI solder mado nyocha Online AOI nyocha SMT isiokwu mbụ nyocha mpụga X-RAY-welding nyocha BGA ngwaọrụ rework QA nyocha Anti-static nkwakọba ihe na mbupu Ngwa nkwurịta okwu nkeji ụlọ ọrụ njikwa. Ngwaọrụ Medical Automotive Units Network Devices Gateway Control Packaging & Delivery ABIS CIRCUITS Company abụghị naanị na-agbalị inye ndị ahịa ngwaahịa dị mma, kamakwa ṅaa ntị n'inye ngwugwu zuru oke na nchekwa.Ọzọkwa, anyị na-akwado ụfọdụ ọrụ ahaziri maka iwu niile.- Nkwakọ ngwaahịa a na-ahụkarị: PCB: akpa akara, akpa mgbochi static, katọn dabara adaba.PCBA: Akpa ụfụfụ antistatic, akpa mgbochi static, katọn dabara adaba.Nkwakọ ngwaahịa ahaziri ahazi: Katọn dị n'èzí ga-ebipụta aha adreesị ndị ahịa, akara, onye ahịa kwesịrị ịkọwa ebe ebe na ozi ndị ọzọ.Atụmatụ nnyefe: Maka obere ngwugwu, anyị na-adụ ọdụ ịhọrọ site Express ma ọ bụ ọrụ DDU bụ ụzọ kachasị ngwa ngwa.Maka ngwugwu dị arọ, ngwọta kachasị mma bụ njem ụgbọ mmiri.Usoro azụmahịa -Okwu nnyefe anabatara FOB, CIF, EXW, FCA, CPT, DDP, DDU, Nnyefe ngwa ngwa, DAF --Ụgwọ ego anabatara USD, EUR, CNY.-Ụdị ịkwụ ụgwọ anabatara T/T, PayPal, Western Union.Nkwupụta sitere na ABIS Iji hụ na ọnụahịa ziri ezi, jide n'aka na itinye ozi ndị a maka ọrụ gị: Faịlụ GERBER zuru ezu gụnyere ndepụta BOM ọnụ ọgụgụ Tụgharịa oge Panelization Requirements Materials Requirements Mezue ihe ndị a chọrọ ka a ga-ebunye nrụtụ aka omenala gị n'ime naanị awa 2-24, dabere. na mgbagwoju anya imewe.Biko mee ka anyị mara maka ọdịmma ọ bụla!ABIS na-eche echiche gị niile

Turn-key printed circuit board assembly
Shenzhen Hot ere Fr4 94v0 PCB Main Control Board Customization Clone Electronic Flexible PCB Design PCBA Board

Ọrụ PCBA Okwu Mmalite ABIS CIRCUITS Company na-ebuga ọrụ, ọ bụghị naanị ngwaahịa.Anyị na-enye ihe ngwọta, ọ bụghị naanị ngwongwo.Site na mmepụta PCB, ihe ndị na-azụrụ ihe na ihe ndị ahụ na-agbakọta.Gụnyere: PCB Custom PCB eserese / imewe dị ka eserese schematic gị PCB nrụpụta Component sourcing PCB Assemble PCBA 100% nwalee Uru anyị Euipment dị elu-oke ọsọ Pick na ebe igwe nwere ike hazie ihe dị ka 25,000 SMD components kwa elekere Ikike ọkọnọ dị elu 60K Sqm kwa ọnwa-Na-enye obere olu na mmepụta PCB chọrọ, na-arụpụta nnukwu mmepụta ndị ọkachamara injinia-40 injinia na ụlọ ọrụ nke ha, siri ike na OEM.Na-enye abụọ dị mfe nhọrọ: omenala na Standard-Na-omimi ihe ọmụma nke IPC Class II na III Standards Anyị na-enye a keukwu turn-igodo EMS ọrụ ndị ahịa chọrọ ka anyị kpọkọta PCB n'ime PCBA, gụnyere prototypes, NPI oru ngo, obere na ọkara. olu.Anyị nwekwara ike iwepụta akụrụngwa niile maka ọrụ mgbakọ PCB gị.Ndị injinia anyị na ndị otu na-egwupụta ihe nwere ahụmịhe bara ụba na agbụ ọkọnọ na ụlọ ọrụ EMS, nwere ihe ọmụma miri emi na mgbakọ SMT na-enye ohere iji dozie nsogbu mmepụta niile.Ọrụ anyị na-efu ọnụ, na-agbanwe agbanwe, yana ntụkwasị obi.Anyị nwere afọ ojuju ndị ahịa n'ofe ọtụtụ ụlọ ọrụ gụnyere ahụike, ụlọ ọrụ mmepụta ihe, ụgbọ ala na ngwa eletrọnịkị ndị ahịa.PCBA ike 1 SMT mgbakọ gụnyere BGA mgbakọ 2 Nabata SMD ibe: 0204, BGA, QFP, QFN, TSOP 3 Akụkụ elu: 0.2-25mm 4 Min mbukota: 0204 5 Min anya n'etiti BGA : 0.25-2.0mm 6 Min BGA size: 0. -0.63mm 7 Min QFP oghere: 0.35mm 8 Min mgbakọ size: (X * Y): 50 * 30mm 9 Max mgbakọ size: (X * Y): 350*550mm 10 Nhọrọ-nkwadebe nkenke: ± 0.01mm 11 Ikike ntinye : 0805, 0603, 0402 12 High pin count press fit dị 13 SMT ikike kwa ụbọchị: 80,000 isi - ike - SMT Lines 9 (5 Yamaha,4KME) Ikike 52 nde placements kwa ọnwa Max Board Size 457*356mm.(18" X14”) Min akụrụngwa size 0201-54 sq.mm.(0.084 sq.inch), ogologo njikọ, CSP, BGA, QFP Speed ​​0.15 sec / mgbawa,0.7 sec/QFP -Ike - PTH ahịrị 2 Max osisi obosara 400 mm Ụdị Dual wave Pbs status Lead-free line support Max temp 399 degrees C Spray flux add-on Pre-heat 3 Production Processes Material Anata → IQC → Stock → Material to SMT → SMT Line Loading → Solder Paste/Glue Printing → Chip Mount → Reflow → 100% Nleba anya → Nyocha anya na-akpaghị aka (AOI) → SMT QC Sampling → SMT Stock → Akụrụngwa na PTH → PTH Line Loading → Plated Site na oghere → Wave Soldering → Metụ elu → 100% Nleba anya → 100% Nleba anya → Pait → PTH QC Sampcu Nnwale (ICT) → Mgbakọ ikpeazụ → Nnwale arụ ọrụ (FCT) → Mbukota → OQC Sampling → Njikwa ogo mbupu AOI Nlele nyocha maka ihe na-ere ihe nleba anya ruo 0201 Nyocha maka ihe ndị na-efu, nkwụghachi, akụkụ ezighi ezi, nyocha X-Ray polarity X. -Ray na-enye nlebanya dị elu nke: ngwugwu BGAs/Micro BGAs/Chip scale /Bare Boards In-Circuit Testing In-Circuit A na-ejikarị ya na AOI na-ebelata ntụpọ arụ ọrụ kpatara site na nsogbu akụrụngwa.Nnwale ike elu ule ọrụ dị elu Nnwale ngwa ngwa ngwa ngwa ngwa ngwa ule nyocha IOC na-abata nyocha SPI solder mado nyocha Online AOI nyocha SMT isiokwu mbụ nyocha mpụga X-RAY-welding nyocha BGA ngwaọrụ rework QA nyocha Anti-static nkwakọba ihe na mbupu Ngwa nkwurịta okwu nkeji ụlọ ọrụ njikwa. Ngwaọrụ Medical Automotive Units Network Devices Gateway Control Packaging & Delivery ABIS CIRCUITS Company abụghị naanị na-agbalị inye ndị ahịa ngwaahịa dị mma, kamakwa ṅaa ntị n'inye ngwugwu zuru oke na nchekwa.Ọzọkwa, anyị na-akwado ụfọdụ ọrụ ahaziri maka iwu niile.- Nkwakọ ngwaahịa a na-ahụkarị: PCB: akpa akara, akpa mgbochi static, katọn dabara adaba.PCBA: Akpa ụfụfụ antistatic, akpa mgbochi static, katọn dabara adaba.Nkwakọ ngwaahịa ahaziri ahazi: Katọn dị n'èzí ga-ebipụta aha adreesị ndị ahịa, akara, onye ahịa kwesịrị ịkọwa ebe ebe na ozi ndị ọzọ.Atụmatụ nnyefe: Maka obere ngwugwu, anyị na-adụ ọdụ ịhọrọ site Express ma ọ bụ ọrụ DDU bụ ụzọ kachasị ngwa ngwa.Maka ngwugwu dị arọ, ngwọta kachasị mma bụ njem ụgbọ mmiri.Usoro azụmahịa -Okwu nnyefe anabatara FOB, CIF, EXW, FCA, CPT, DDP, DDU, Nnyefe ngwa ngwa, DAF --Ụgwọ ego anabatara USD, EUR, CNY.-Ụdị ịkwụ ụgwọ anabatara T/T, PayPal, Western Union.Nkwupụta sitere na ABIS Iji hụ na ọnụahịa ziri ezi, jide n'aka na itinye ozi ndị a maka ọrụ gị: Faịlụ GERBER zuru ezu gụnyere ndepụta BOM ọnụ ọgụgụ Tụgharịa oge Panelization Requirements Materials Requirements Mezue ihe ndị a chọrọ ka a ga-ebunye nrụtụ aka omenala gị n'ime naanị awa 2-24, dabere. na mgbagwoju anya imewe.Biko mee ka anyị mara maka ọdịmma ọ bụla!ABIS na-eche echiche gị niile

Turn-key printed circuit board assembly
Multi Layer PCB Board Assembly na High Quality UL

Ọrụ PCBA Okwu Mmalite ABIS CIRCUITS Company na-ebuga ọrụ, ọ bụghị naanị ngwaahịa.Anyị na-enye ihe ngwọta, ọ bụghị naanị ngwongwo.Site na mmepụta PCB, ihe ndị na-azụrụ ihe na ihe ndị ahụ na-agbakọta.Gụnyere: PCB Custom PCB eserese / imewe dị ka eserese schematic gị PCB nrụpụta Component sourcing PCB Assemble PCBA 100% nwalee Uru anyị Euipment dị elu-oke ọsọ Pick na ebe igwe nwere ike hazie ihe dị ka 25,000 SMD components kwa elekere Ikike ọkọnọ dị elu 60K Sqm kwa ọnwa-Na-enye obere olu na mmepụta PCB chọrọ, na-arụpụta nnukwu mmepụta ndị ọkachamara injinia-40 injinia na ụlọ ọrụ nke ha, siri ike na OEM.Na-enye abụọ dị mfe nhọrọ: omenala na Standard-Na-omimi ihe ọmụma nke IPC Class II na III Standards Anyị na-enye a keukwu turn-igodo EMS ọrụ ndị ahịa chọrọ ka anyị kpọkọta PCB n'ime PCBA, gụnyere prototypes, NPI oru ngo, obere na ọkara. olu.Anyị nwekwara ike iwepụta akụrụngwa niile maka ọrụ mgbakọ PCB gị.Ndị injinia anyị na ndị otu na-egwupụta ihe nwere ahụmịhe bara ụba na agbụ ọkọnọ na ụlọ ọrụ EMS, nwere ihe ọmụma miri emi na mgbakọ SMT na-enye ohere iji dozie nsogbu mmepụta niile.Ọrụ anyị na-efu ọnụ, na-agbanwe agbanwe, yana ntụkwasị obi.Anyị nwere afọ ojuju ndị ahịa n'ofe ọtụtụ ụlọ ọrụ gụnyere ahụike, ụlọ ọrụ mmepụta ihe, ụgbọ ala na ngwa eletrọnịkị ndị ahịa.PCBA ike 1 SMT mgbakọ gụnyere BGA mgbakọ 2 Nabata SMD ibe: 0204, BGA, QFP, QFN, TSOP 3 Akụkụ elu: 0.2-25mm 4 Min mbukota: 0204 5 Min anya n'etiti BGA : 0.25-2.0mm 6 Min BGA size: 0. -0.63mm 7 Min QFP oghere: 0.35mm 8 Min mgbakọ size: (X * Y): 50 * 30mm 9 Max mgbakọ size: (X * Y): 350*550mm 10 Nhọrọ-nkwadebe nkenke: ± 0.01mm 11 Ikike ntinye : 0805, 0603, 0402 12 High pin count press fit dị 13 SMT ikike kwa ụbọchị: 80,000 isi - ike - SMT Lines 9 (5 Yamaha,4KME) Ikike 52 nde placements kwa ọnwa Max Board Size 457*356mm.(18" X14”) Min akụrụngwa size 0201-54 sq.mm.(0.084 sq.inch), ogologo njikọ, CSP, BGA, QFP Speed ​​0.15 sec / mgbawa,0.7 sec/QFP -Ike - PTH ahịrị 2 Max osisi obosara 400 mm Ụdị Dual wave Pbs status Lead-free line support Max temp 399 degrees C Spray flux add-on Pre-heat 3 Production Processes Material Anata → IQC → Stock → Material to SMT → SMT Line Loading → Solder Paste/Glue Printing → Chip Mount → Reflow → 100% Nleba anya → Nyocha anya na-akpaghị aka (AOI) → SMT QC Sampling → SMT Stock → Akụrụngwa na PTH → PTH Line Loading → Plated Site na oghere → Wave Soldering → Metụ elu → 100% Nleba anya → 100% Nleba anya → Pait → PTH QC Sampcu Nnwale (ICT) → Mgbakọ ikpeazụ → Nnwale arụ ọrụ (FCT) → Mbukota → OQC Sampling → Njikwa ogo mbupu AOI Nlele nyocha maka ihe na-ere ihe nleba anya ruo 0201 Nyocha maka ihe ndị na-efu, nkwụghachi, akụkụ ezighi ezi, nyocha X-Ray polarity X. -Ray na-enye nlebanya dị elu nke: ngwugwu BGAs/Micro BGAs/Chip scale /Bare Boards In-Circuit Testing In-Circuit A na-ejikarị ya na AOI na-ebelata ntụpọ arụ ọrụ kpatara site na nsogbu akụrụngwa.Nnwale ike elu ule ọrụ dị elu Nnwale ngwa ngwa ngwa ngwa ngwa ngwa ule nyocha IOC na-abata nyocha SPI solder mado nyocha Online AOI nyocha SMT isiokwu mbụ nyocha mpụga X-RAY-welding nyocha BGA ngwaọrụ rework QA nyocha Anti-static nkwakọba ihe na mbupu Ngwa nkwurịta okwu nkeji ụlọ ọrụ njikwa. Ngwaọrụ Medical Automotive Units Network Devices Gateway Control Packaging & Delivery ABIS CIRCUITS Company abụghị naanị na-agbalị inye ndị ahịa ngwaahịa dị mma, kamakwa ṅaa ntị n'inye ngwugwu zuru oke na nchekwa.Ọzọkwa, anyị na-akwado ụfọdụ ọrụ ahaziri maka iwu niile.- Nkwakọ ngwaahịa a na-ahụkarị: PCB: akpa akara, akpa mgbochi static, katọn dabara adaba.PCBA: Akpa ụfụfụ antistatic, akpa mgbochi static, katọn dabara adaba.Nkwakọ ngwaahịa ahaziri ahazi: Katọn dị n'èzí ga-ebipụta aha adreesị ndị ahịa, akara, onye ahịa kwesịrị ịkọwa ebe ebe na ozi ndị ọzọ.Atụmatụ nnyefe: Maka obere ngwugwu, anyị na-adụ ọdụ ịhọrọ site Express ma ọ bụ ọrụ DDU bụ ụzọ kachasị ngwa ngwa.Maka ngwugwu dị arọ, ngwọta kachasị mma bụ njem ụgbọ mmiri.Usoro azụmahịa -Okwu nnyefe anabatara FOB, CIF, EXW, FCA, CPT, DDP, DDU, Nnyefe ngwa ngwa, DAF --Ụgwọ ego anabatara USD, EUR, CNY.-Ụdị ịkwụ ụgwọ anabatara T/T, PayPal, Western Union.Nkwupụta sitere na ABIS Iji hụ na ọnụahịa ziri ezi, jide n'aka na itinye ozi ndị a maka ọrụ gị: Faịlụ GERBER zuru ezu gụnyere ndepụta BOM ọnụ ọgụgụ Tụgharịa oge Panelization Requirements Materials Requirements Mezue ihe ndị a chọrọ ka a ga-ebunye nrụtụ aka omenala gị n'ime naanị awa 2-24, dabere. na mgbagwoju anya imewe.Biko mee ka anyị mara maka ọdịmma ọ bụla!ABIS na-eche echiche gị niile

Turn-key printed circuit board assembly
Ọkachamara SMT, PCBA maka Mgbakọ bọọdụ PCB-atụgharị

Ọrụ PCBA Okwu Mmalite ABIS CIRCUITS Company na-ebuga ọrụ, ọ bụghị naanị ngwaahịa.Anyị na-enye ihe ngwọta, ọ bụghị naanị ngwongwo.Site na mmepụta PCB, ihe ndị na-azụrụ ihe na ihe ndị ahụ na-agbakọta.Gụnyere: PCB Custom PCB eserese / imewe dị ka eserese schematic gị PCB nrụpụta Component sourcing PCB Assemble PCBA 100% nwalee Uru anyị Euipment dị elu-oke ọsọ Pick na ebe igwe nwere ike hazie ihe dị ka 25,000 SMD components kwa elekere Ikike ọkọnọ dị elu 60K Sqm kwa ọnwa-Na-enye obere olu na mmepụta PCB chọrọ, na-arụpụta nnukwu mmepụta ndị ọkachamara injinia-40 injinia na ụlọ ọrụ nke ha, siri ike na OEM.Na-enye abụọ dị mfe nhọrọ: omenala na Standard-Na-omimi ihe ọmụma nke IPC Class II na III Standards Anyị na-enye a keukwu turn-igodo EMS ọrụ ndị ahịa chọrọ ka anyị kpọkọta PCB n'ime PCBA, gụnyere prototypes, NPI oru ngo, obere na ọkara. olu.Anyị nwekwara ike iwepụta akụrụngwa niile maka ọrụ mgbakọ PCB gị.Ndị injinia anyị na ndị otu na-egwupụta ihe nwere ahụmịhe bara ụba na agbụ ọkọnọ na ụlọ ọrụ EMS, nwere ihe ọmụma miri emi na mgbakọ SMT na-enye ohere iji dozie nsogbu mmepụta niile.Ọrụ anyị na-efu ọnụ, na-agbanwe agbanwe, yana ntụkwasị obi.Anyị nwere afọ ojuju ndị ahịa n'ofe ọtụtụ ụlọ ọrụ gụnyere ahụike, ụlọ ọrụ mmepụta ihe, ụgbọ ala na ngwa eletrọnịkị ndị ahịa.PCBA ike 1 SMT mgbakọ gụnyere BGA mgbakọ 2 Nabata SMD ibe: 0204, BGA, QFP, QFN, TSOP 3 Akụkụ elu: 0.2-25mm 4 Min mbukota: 0204 5 Min anya n'etiti BGA : 0.25-2.0mm 6 Min BGA size: 0. -0.63mm 7 Min QFP oghere: 0.35mm 8 Min mgbakọ size: (X * Y): 50 * 30mm 9 Max mgbakọ size: (X * Y): 350*550mm 10 Nhọrọ-nkwadebe nkenke: ± 0.01mm 11 Ikike ntinye : 0805, 0603, 0402 12 High pin count press fit dị 13 SMT ikike kwa ụbọchị: 80,000 isi - ike - SMT Lines 9 (5 Yamaha,4KME) Ikike 52 nde placements kwa ọnwa Max Board Size 457*356mm.(18" X14”) Min akụrụngwa size 0201-54 sq.mm.(0.084 sq.inch), ogologo njikọ, CSP, BGA, QFP Speed ​​0.15 sec / mgbawa,0.7 sec/QFP -Ike - PTH ahịrị 2 Max osisi obosara 400 mm Ụdị Dual wave Pbs status Lead-free line support Max temp 399 degrees C Spray flux add-on Pre-heat 3 Production Processes Material Anata → IQC → Stock → Material to SMT → SMT Line Loading → Solder Paste/Glue Printing → Chip Mount → Reflow → 100% Nleba anya → Nyocha anya na-akpaghị aka (AOI) → SMT QC Sampling → SMT Stock → Akụrụngwa na PTH → PTH Line Loading → Plated Site na oghere → Wave Soldering → Metụ elu → 100% Nleba anya → 100% Nleba anya → Pait → PTH QC Sampcu Nnwale (ICT) → Mgbakọ ikpeazụ → Nnwale arụ ọrụ (FCT) → Mbukota → OQC Sampling → Njikwa ogo mbupu AOI Nlele nyocha maka ihe na-ere ihe nleba anya ruo 0201 Nyocha maka ihe ndị na-efu, nkwụghachi, akụkụ ezighi ezi, nyocha X-Ray polarity X. -Ray na-enye nlebanya dị elu nke: ngwugwu BGAs/Micro BGAs/Chip scale /Bare Boards In-Circuit Testing In-Circuit A na-ejikarị ya na AOI na-ebelata ntụpọ arụ ọrụ kpatara site na nsogbu akụrụngwa.Nnwale ike elu ule ọrụ dị elu Nnwale ngwa ngwa ngwa ngwa ngwa ngwa ule nyocha IOC na-abata nyocha SPI solder mado nyocha Online AOI nyocha SMT isiokwu mbụ nyocha mpụga X-RAY-welding nyocha BGA ngwaọrụ rework QA nyocha Anti-static nkwakọba ihe na mbupu Ngwa nkwurịta okwu nkeji ụlọ ọrụ njikwa. Ngwaọrụ Medical Automotive Units Network Devices Gateway Control Packaging & Delivery ABIS CIRCUITS Company abụghị naanị na-agbalị inye ndị ahịa ngwaahịa dị mma, kamakwa ṅaa ntị n'inye ngwugwu zuru oke na nchekwa.Ọzọkwa, anyị na-akwado ụfọdụ ọrụ ahaziri maka iwu niile.- Nkwakọ ngwaahịa a na-ahụkarị: PCB: akpa akara, akpa mgbochi static, katọn dabara adaba.PCBA: Akpa ụfụfụ antistatic, akpa mgbochi static, katọn dabara adaba.Nkwakọ ngwaahịa ahaziri ahazi: Katọn dị n'èzí ga-ebipụta aha adreesị ndị ahịa, akara, onye ahịa kwesịrị ịkọwa ebe ebe na ozi ndị ọzọ.Atụmatụ nnyefe: Maka obere ngwugwu, anyị na-adụ ọdụ ịhọrọ site Express ma ọ bụ ọrụ DDU bụ ụzọ kachasị ngwa ngwa.Maka ngwugwu dị arọ, ngwọta kachasị mma bụ njem ụgbọ mmiri.Usoro azụmahịa -Okwu nnyefe anabatara FOB, CIF, EXW, FCA, CPT, DDP, DDU, Nnyefe ngwa ngwa, DAF --Ụgwọ ego anabatara USD, EUR, CNY.-Ụdị ịkwụ ụgwọ anabatara T/T, PayPal, Western Union.Nkwupụta sitere na ABIS Iji hụ na ọnụahịa ziri ezi, jide n'aka na itinye ozi ndị a maka ọrụ gị: Faịlụ GERBER zuru ezu gụnyere ndepụta BOM ọnụ ọgụgụ Tụgharịa oge Panelization Requirements Materials Requirements Mezue ihe ndị a chọrọ ka a ga-ebunye nrụtụ aka omenala gị n'ime naanị awa 2-24, dabere. na mgbagwoju anya imewe.Biko mee ka anyị mara maka ọdịmma ọ bụla!ABIS na-eche echiche gị niile

Turn-key printed circuit board assembly
Omenala 1.6mm ọla kọpa Turn Key Prototype PCBA isi Board

Ọrụ PCBA Okwu Mmalite ABIS CIRCUITS Company na-ebuga ọrụ, ọ bụghị naanị ngwaahịa.Anyị na-enye ihe ngwọta, ọ bụghị naanị ngwongwo.Site na mmepụta PCB, ihe ndị na-azụrụ ihe na ihe ndị ahụ na-agbakọta.Gụnyere: PCB Custom PCB eserese / imewe dị ka eserese schematic gị PCB nrụpụta Component sourcing PCB Assemble PCBA 100% nwalee Uru anyị Euipment dị elu-oke ọsọ Pick na ebe igwe nwere ike hazie ihe dị ka 25,000 SMD components kwa elekere Ikike ọkọnọ dị elu 60K Sqm kwa ọnwa-Na-enye obere olu na mmepụta PCB chọrọ, na-arụpụta nnukwu mmepụta ndị ọkachamara injinia-40 injinia na ụlọ ọrụ nke ha, siri ike na OEM.Na-enye abụọ dị mfe nhọrọ: omenala na Standard-Na-omimi ihe ọmụma nke IPC Class II na III Standards Anyị na-enye a keukwu turn-igodo EMS ọrụ ndị ahịa chọrọ ka anyị kpọkọta PCB n'ime PCBA, gụnyere prototypes, NPI oru ngo, obere na ọkara. olu.Anyị nwekwara ike iwepụta akụrụngwa niile maka ọrụ mgbakọ PCB gị.Ndị injinia anyị na ndị otu na-egwupụta ihe nwere ahụmịhe bara ụba na agbụ ọkọnọ na ụlọ ọrụ EMS, nwere ihe ọmụma miri emi na mgbakọ SMT na-enye ohere iji dozie nsogbu mmepụta niile.Ọrụ anyị na-efu ọnụ, na-agbanwe agbanwe, yana ntụkwasị obi.Anyị nwere afọ ojuju ndị ahịa n'ofe ọtụtụ ụlọ ọrụ gụnyere ahụike, ụlọ ọrụ mmepụta ihe, ụgbọ ala na ngwa eletrọnịkị ndị ahịa.PCBA ike 1 SMT mgbakọ gụnyere BGA mgbakọ 2 Nabata SMD ibe: 0204, BGA, QFP, QFN, TSOP 3 Akụkụ elu: 0.2-25mm 4 Min mbukota: 0204 5 Min anya n'etiti BGA : 0.25-2.0mm 6 Min BGA size: 0. -0.63mm 7 Min QFP oghere: 0.35mm 8 Min mgbakọ size: (X * Y): 50 * 30mm 9 Max mgbakọ size: (X * Y): 350*550mm 10 Nhọrọ-nkwadebe nkenke: ± 0.01mm 11 Ikike ntinye : 0805, 0603, 0402 12 High pin count press fit dị 13 SMT ikike kwa ụbọchị: 80,000 isi - ike - SMT Lines 9 (5 Yamaha,4KME) Ikike 52 nde placements kwa ọnwa Max Board Size 457*356mm.(18" X14”) Min akụrụngwa size 0201-54 sq.mm.(0.084 sq.inch), ogologo njikọ, CSP, BGA, QFP Speed ​​0.15 sec / mgbawa,0.7 sec/QFP -Ike - PTH ahịrị 2 Max osisi obosara 400 mm Ụdị Dual wave Pbs status Lead-free line support Max temp 399 degrees C Spray flux add-on Pre-heat 3 Production Processes Material Anata → IQC → Stock → Material to SMT → SMT Line Loading → Solder Paste/Glue Printing → Chip Mount → Reflow → 100% Nleba anya → Nyocha anya na-akpaghị aka (AOI) → SMT QC Sampling → SMT Stock → Akụrụngwa na PTH → PTH Line Loading → Plated Site na oghere → Wave Soldering → Metụ elu → 100% Nleba anya → 100% Nleba anya → Pait → PTH QC Sampcu Nnwale (ICT) → Mgbakọ ikpeazụ → Nnwale arụ ọrụ (FCT) → Mbukota → OQC Sampling → Njikwa ogo mbupu AOI Nlele nyocha maka ihe na-ere ihe nleba anya ruo 0201 Nyocha maka ihe ndị na-efu, nkwụghachi, akụkụ ezighi ezi, nyocha X-Ray polarity X. -Ray na-enye nlebanya dị elu nke: ngwugwu BGAs/Micro BGAs/Chip scale /Bare Boards In-Circuit Testing In-Circuit A na-ejikarị ya na AOI na-ebelata ntụpọ arụ ọrụ kpatara site na nsogbu akụrụngwa.Nnwale ike elu ule ọrụ dị elu Nnwale ngwa ngwa ngwa ngwa ngwa ngwa ule nyocha IOC na-abata nyocha SPI solder mado nyocha Online AOI nyocha SMT isiokwu mbụ nyocha mpụga X-RAY-welding nyocha BGA ngwaọrụ rework QA nyocha Anti-static nkwakọba ihe na mbupu Ngwa nkwurịta okwu nkeji ụlọ ọrụ njikwa. Ngwaọrụ Medical Automotive Units Network Devices Gateway Control Packaging & Delivery ABIS CIRCUITS Company abụghị naanị na-agbalị inye ndị ahịa ngwaahịa dị mma, kamakwa ṅaa ntị n'inye ngwugwu zuru oke na nchekwa.Ọzọkwa, anyị na-akwado ụfọdụ ọrụ ahaziri maka iwu niile.- Nkwakọ ngwaahịa a na-ahụkarị: PCB: akpa akara, akpa mgbochi static, katọn dabara adaba.PCBA: Akpa ụfụfụ antistatic, akpa mgbochi static, katọn dabara adaba.Nkwakọ ngwaahịa ahaziri ahazi: Katọn dị n'èzí ga-ebipụta aha adreesị ndị ahịa, akara, onye ahịa kwesịrị ịkọwa ebe ebe na ozi ndị ọzọ.Atụmatụ nnyefe: Maka obere ngwugwu, anyị na-adụ ọdụ ịhọrọ site Express ma ọ bụ ọrụ DDU bụ ụzọ kachasị ngwa ngwa.Maka ngwugwu dị arọ, ngwọta kachasị mma bụ njem ụgbọ mmiri.Usoro azụmahịa -Okwu nnyefe anabatara FOB, CIF, EXW, FCA, CPT, DDP, DDU, Nnyefe ngwa ngwa, DAF --Ụgwọ ego anabatara USD, EUR, CNY.-Ụdị ịkwụ ụgwọ anabatara T/T, PayPal, Western Union.Nkwupụta sitere na ABIS Iji hụ na ọnụahịa ziri ezi, jide n'aka na itinye ozi ndị a maka ọrụ gị: Faịlụ GERBER zuru ezu gụnyere ndepụta BOM ọnụ ọgụgụ Tụgharịa oge Panelization Requirements Materials Requirements Mezue ihe ndị a chọrọ ka a ga-ebunye nrụtụ aka omenala gị n'ime naanị awa 2-24, dabere. na mgbagwoju anya imewe.Biko mee ka anyị mara maka ọdịmma ọ bụla!ABIS na-eche echiche gị niile

Turn-key printed circuit board assembly
Otu nkwụsị ngwọta PCB Board Assembly na High Quality UL

Ọrụ PCBA Okwu Mmalite ABIS CIRCUITS Company na-ebuga ọrụ, ọ bụghị naanị ngwaahịa.Anyị na-enye ihe ngwọta, ọ bụghị naanị ngwongwo.Site na mmepụta PCB, ihe ndị na-azụrụ ihe na ihe ndị ahụ na-agbakọta.Gụnyere: PCB Custom PCB eserese / imewe dị ka eserese schematic gị PCB nrụpụta Component sourcing PCB Assemble PCBA 100% nwalee Uru anyị Euipment dị elu-oke ọsọ Pick na ebe igwe nwere ike hazie ihe dị ka 25,000 SMD components kwa elekere Ikike ọkọnọ dị elu 60K Sqm kwa ọnwa-Na-enye obere olu na mmepụta PCB chọrọ, na-arụpụta nnukwu mmepụta ndị ọkachamara injinia-40 injinia na ụlọ ọrụ nke ha, siri ike na OEM.Na-enye abụọ dị mfe nhọrọ: omenala na Standard-Na-omimi ihe ọmụma nke IPC Class II na III Standards Anyị na-enye a keukwu turn-igodo EMS ọrụ ndị ahịa chọrọ ka anyị kpọkọta PCB n'ime PCBA, gụnyere prototypes, NPI oru ngo, obere na ọkara. olu.Anyị nwekwara ike iwepụta akụrụngwa niile maka ọrụ mgbakọ PCB gị.Ndị injinia anyị na ndị otu na-egwupụta ihe nwere ahụmịhe bara ụba na agbụ ọkọnọ na ụlọ ọrụ EMS, nwere ihe ọmụma miri emi na mgbakọ SMT na-enye ohere iji dozie nsogbu mmepụta niile.Ọrụ anyị na-efu ọnụ, na-agbanwe agbanwe, yana ntụkwasị obi.Anyị nwere afọ ojuju ndị ahịa n'ofe ọtụtụ ụlọ ọrụ gụnyere ahụike, ụlọ ọrụ mmepụta ihe, ụgbọ ala na ngwa eletrọnịkị ndị ahịa.PCBA ike 1 SMT mgbakọ gụnyere BGA mgbakọ 2 Nabata SMD ibe: 0204, BGA, QFP, QFN, TSOP 3 Akụkụ elu: 0.2-25mm 4 Min mbukota: 0204 5 Min anya n'etiti BGA : 0.25-2.0mm 6 Min BGA size: 0. -0.63mm 7 Min QFP oghere: 0.35mm 8 Min mgbakọ size: (X * Y): 50 * 30mm 9 Max mgbakọ size: (X * Y): 350*550mm 10 Nhọrọ-nkwadebe nkenke: ± 0.01mm 11 Ikike ntinye : 0805, 0603, 0402 12 High pin count press fit dị 13 SMT ikike kwa ụbọchị: 80,000 isi - ike - SMT Lines 9 (5 Yamaha,4KME) Ikike 52 nde placements kwa ọnwa Max Board Size 457*356mm.(18" X14”) Min akụrụngwa size 0201-54 sq.mm.(0.084 sq.inch), ogologo njikọ, CSP, BGA, QFP Speed ​​0.15 sec / mgbawa,0.7 sec/QFP -Ike - PTH ahịrị 2 Max osisi obosara 400 mm Ụdị Dual wave Pbs status Lead-free line support Max temp 399 degrees C Spray flux add-on Pre-heat 3 Production Processes Material Anata → IQC → Stock → Material to SMT → SMT Line Loading → Solder Paste/Glue Printing → Chip Mount → Reflow → 100% Nleba anya → Nyocha anya na-akpaghị aka (AOI) → SMT QC Sampling → SMT Stock → Akụrụngwa na PTH → PTH Line Loading → Plated Site na oghere → Wave Soldering → Metụ elu → 100% Nleba anya → 100% Nleba anya → Pait → PTH QC Sampcu Nnwale (ICT) → Mgbakọ ikpeazụ → Nnwale arụ ọrụ (FCT) → Mbukota → OQC Sampling → Njikwa ogo mbupu AOI Nlele nyocha maka ihe na-ere ihe nleba anya ruo 0201 Nyocha maka ihe ndị na-efu, nkwụghachi, akụkụ ezighi ezi, nyocha X-Ray polarity X. -Ray na-enye nlebanya dị elu nke: ngwugwu BGAs/Micro BGAs/Chip scale /Bare Boards In-Circuit Testing In-Circuit A na-ejikarị ya na AOI na-ebelata ntụpọ arụ ọrụ kpatara site na nsogbu akụrụngwa.Nnwale ike elu ule ọrụ dị elu Nnwale ngwa ngwa ngwa ngwa ngwa ngwa ule nyocha IOC na-abata nyocha SPI solder mado nyocha Online AOI nyocha SMT isiokwu mbụ nyocha mpụga X-RAY-welding nyocha BGA ngwaọrụ rework QA nyocha Anti-static nkwakọba ihe na mbupu Ngwa nkwurịta okwu nkeji ụlọ ọrụ njikwa. Ngwaọrụ Medical Automotive Units Network Devices Gateway Control Packaging & Delivery ABIS CIRCUITS Company abụghị naanị na-agbalị inye ndị ahịa ngwaahịa dị mma, kamakwa ṅaa ntị n'inye ngwugwu zuru oke na nchekwa.Ọzọkwa, anyị na-akwado ụfọdụ ọrụ ahaziri maka iwu niile.- Nkwakọ ngwaahịa a na-ahụkarị: PCB: akpa akara, akpa mgbochi static, katọn dabara adaba.PCBA: Akpa ụfụfụ antistatic, akpa mgbochi static, katọn dabara adaba.Nkwakọ ngwaahịa ahaziri ahazi: Katọn dị n'èzí ga-ebipụta aha adreesị ndị ahịa, akara, onye ahịa kwesịrị ịkọwa ebe ebe na ozi ndị ọzọ.Atụmatụ nnyefe: Maka obere ngwugwu, anyị na-adụ ọdụ ịhọrọ site Express ma ọ bụ ọrụ DDU bụ ụzọ kachasị ngwa ngwa.Maka ngwugwu dị arọ, ngwọta kachasị mma bụ njem ụgbọ mmiri.Usoro azụmahịa -Okwu nnyefe anabatara FOB, CIF, EXW, FCA, CPT, DDP, DDU, Nnyefe ngwa ngwa, DAF --Ụgwọ ego anabatara USD, EUR, CNY.-Ụdị ịkwụ ụgwọ anabatara T/T, PayPal, Western Union.Nkwupụta sitere na ABIS Iji hụ na ọnụahịa ziri ezi, jide n'aka na itinye ozi ndị a maka ọrụ gị: Faịlụ GERBER zuru ezu gụnyere ndepụta BOM ọnụ ọgụgụ Tụgharịa oge Panelization Requirements Materials Requirements Mezue ihe ndị a chọrọ ka a ga-ebunye nrụtụ aka omenala gị n'ime naanị awa 2-24, dabere. na mgbagwoju anya imewe.Biko mee ka anyị mara maka ọdịmma ọ bụla!ABIS na-eche echiche gị niile

Nwebiisinka © 2023 ABIS CIRCUITS CO., LTD.Ikike niile echekwabara. Ike site na

Netwọk IPv6 kwadoro

n'elu

Hapụ ozi

Hapụ ozi

    Ọ bụrụ na ị nwere mmasị na ngwaahịa anyị ma chọọ ịmatakwu nkọwa, biko hapụ ozi ebe a, anyị ga-aza gị ozugbo anyị nwere ike.

  • #
  • #
  • #
  • #
    Weghachite onyonyo a