other
Nā huahana
Home HANA PCB PCB paakiki HDI pcb Hot Sale HDI Paʻi Kaapuni Papa Manufacturing Kina mea hoʻolako

Hot Sale HDI Paʻi Kaapuni Papa Manufacturing Kina mea hoʻolako


  • 'ikamu NO.:

    ABIS-HDI -003
  • Papahana:

    4
  • Material:

    TG kiʻekiʻe fr-4
  • Mānoanoa Papa Hoʻopau:

    1.0mm
  • Ka mānoanoa keleawe i pau:

    1oz
  • Min Laina Laulā/Lua:

    ≥3mil(0.075mm)
  • Min Hole:

    ≥4mil(0.1mm)
  • Ili Pau:

    ENIG
  • Waihoʻoluʻu Palekana Solder:

    ʻōmaʻomaʻo
  • kala kala:

    ʻeleʻele
  • Noi:

    Mea Hoʻohana Electronics
  • Huahana Huahana

HDI PCB Hoʻolauna


-Wehewehe

HDI PCB ua wehewehe ʻia ma ke ʻano he papa kaapuni i paʻi ʻia me ka ʻoi aku o ka nui o nā uwila ʻoi aku ma mua o ka PCB maʻamau.Loaʻa iā lākou nā laina ʻoi aku ka maikaʻi a me nā hakahaka, nā vias liʻiliʻi a me nā pad hopu, a ʻoi aku ka kiʻekiʻe o ka pā pad pili ma mua o ka hana ma ka ʻenehana PCB maʻamau.Hana ʻia nā HDI PCB ma o microvias , kanuia vias a me ka lamination sequential me nā mea insulation a me nā uwea conductor no ke kiʻekiʻe kiʻekiʻe o ke ala ala.



- Nā noi

Hoʻohana ʻia ʻo HDI PCB e hōʻemi i ka nui a me ke kaumaha, a me ka hoʻomaikaʻi ʻana i ka hana uila o ka hāmeʻa.ʻO HDI PCB ka koho maikaʻi loa i ka helu-papa kiʻekiʻe a me ka laminate maʻamau maʻamau a i ʻole nā ​​papa laminated sequentially.Hoʻokomo ʻo HDI i nā vias makapō a kanu ʻia e kōkua i ka mālama ʻana i ka waiwai PCB ma o ka ʻae ʻana i nā hiʻohiʻona a me nā laina e hoʻolālā ʻia ma luna a ma lalo o lākou me ka ʻole o ka pilina.ʻO ka nui o nā kiʻi maikaʻi o kēia lā BGA ʻAʻole ʻae ʻia nā kapuaʻi ʻāpana flip-chip no ka holo ʻana ma waena o nā pā BGA.ʻO nā makapō a kanu ʻia nā vias e hoʻopili wale i nā papa e koi ana i nā pilina ma kēlā wahi.




No hea mai ka mea resin ma ABIS?


ʻO ka hapa nui o lākou mai Shengyi Technology Co., Ltd. (SYTECH), ʻo ia ka lua o ka mea hana CCL nui loa o ka honua e pili ana i ka nui o ke kūʻai aku, mai 2013 a 2017. Ua hoʻokumu mākou i nā pilina lōʻihi o ka launa pū ʻana. mai 2006. ʻO ka mea resin FR4 ( Hoʻohālike S1000-2, S1141, S1165, S1600 ) hoʻohana nui ʻia no ka hana ʻana i nā papa kaapuni paʻi hoʻokahi a me nā ʻaoʻao ʻelua a me nā papa multi-layer.Eia nā kikoʻī no kāu kuhikuhi.


  • No FR-4: Sheng Yi, King Board, Nan Ya, Polycard, ITEQ, ISOLA
  • No CEM-1 & CEM 3: Sheng Yi, Papa Alii
  • No ke alapine kiʻekiʻe: Sheng Yi
  • No ka ho'ōla UV: Tamura, Chang Xing ( * Loaʻa kala: ʻOmaomao) Solder no ka ʻaoʻao hoʻokahi
  • No ke kiʻi wai wai: Tao Yang, pale (kiʻiʻoniʻoni wet)
  • Chuan Yu ( * Loaʻa nā kala: Keʻokeʻo, Imaginable Solder Yellow, Purple, Red, Blue, Green, Black)



ʻOi aku ka mana hana PCB


Ua ʻike ʻo ABIS i ka hana ʻana i nā mea kūikawā no ka PCB paʻa, e like me: CEM-1/CEM-3, PI, Tg Kiʻekiʻe, Rogers, PTEF, Alu/Cu Base , etc. Aia ma lalo iho kahi ʻike pōkole FYI.



'ikamu

Speci.

Nā ʻāpana

1~20

Mānoanoa Papa

0.1mm-8.0mm

Mea waiwai

FR-4, CEM-1/CEM-3, PI, High Tg, Rogers, PTEF, Alu/Cu Base, etc.

Nui Nui o ka Panel

600mm×1200mm

Min Hole Nui

0.1mm

Min Laina Laulā/Lua

3mil(0.075mm)

Papa Outline tolerance

士0.10mm

Mānoanoa Layer Insulation

0.075mm--5.00mm

Ka Manoanoa keleawe o waho

18um--350um

Luwaha wili (Mechanical)

17um--175um

Hole Hoʻopau (Mechanical)

0.10mm--6.30mm

ʻO ka hoʻomanawanui ʻana (Mechanical)

0.05mm

Kakau inoa (Mechanical)

0.075mm

ʻAspect Ratio

16:1

ʻAno Māka Solder

LPI

SMT Mini.Laulā Māka Solder

0.075mm

Mini.Hoʻomaʻemaʻe Palekana Solder

0.05mm

Anawaena Puka Puka

0.25mm--0.60mm

Ka hoʻomanawanui impedance

士10%

Hoʻopau ʻili

ENIG, OSP, HASL, Chem.Tin/Sn, gula Flash

Soldermask

ʻOmaomao/melemele/ʻeleʻele/keʻokeʻo/ʻulaʻula/uliuli

Silkscreen

ʻulaʻula/melemele/ʻeleʻele/keʻokeʻo

Palapala

UL, ISO 9001, ISO14001, IATF16949

Noi Kuikawa

Puka makapō, manamana gula, BGA, ʻīnika kalapona, pale maka nānā, kaʻina VIP, ka uhi ʻaoʻao, ʻAlua lua

Mea Hoolako Mea

Shengyi, ITEQ, Taiyo, etc.

Pūʻolo maʻamau

Māmā + Kāpena



Kaʻina hana PCB



  • Hoʻomaka ke kaʻina hana me ka hoʻolālā ʻana i ka Layout o ka PCB me ka hoʻohana ʻana i kekahi polokalamu hoʻolālā PCB / CAD Tool ( Proteus, Eagle, a i ʻole CAD ).
  • ʻO ke koena o nā ʻanuʻu o ka Hana Hana ʻana o kahi Papa Kaapuni Paʻi Paʻi ʻia e like me ka PCB ʻaoʻao hoʻokahi a i ʻole PCB ʻaoʻao ʻelua a i ʻole PCB multi-layer.





PCB Ka manawa o waena o ka hoʻomaka a i ka wā pau


Māhele Q/T Ke alakai manawa Manawa alakai maʻamau Nuipa? iecaianoaaiiuo
ʻaoʻao ʻelua 24 hola 3-4 mau lā hana 8-15 mau lā hana
4 Papahana 48 hola 3-5 mau lā hana 10-15 mau lā hana
6 Papahana 72 hola 3-6 mau lā hana 10-15 mau lā hana
8 Papahana 96 hola 3-7 mau lā hana 14-18 mau lā hana
10 Papa 120 hola 3-8 mau lā hana 14-18 mau lā hana
12 Papa 120 hola 3-9 mau lā hana 20-26 mau lā hana
14 Papahana 144 hola 3-10 mau lā hana 20-26 mau lā hana
16-20 Papa Ma muli o nā koi kiko'ī
20+ Papa Ma muli o nā koi kiko'ī


Pehea ka hana ʻana o ABIS i nā pilikia hana ma PCB?


- Hoomakaukau Puka

Ke wehe pono nei i ka ʻōpala a me ka hoʻoponopono ʻana i nā ʻāpana mīkini drill: ma mua o ka hoʻopaʻa ʻia ʻana me ke keleawe, e nānā nui ka abis i nā puka āpau ma kahi fr4 pcb i mālama ʻia e wehe i nā ʻōpala, nā hewa ʻole o ka ʻili, a me ka epoxy smear. .no hoi, i ka hoomaka ana o ke kaʻina hana, drill machine parameter ua hoʻoponopono pololei.


- S Ka hoʻomākaukau ʻana o ka urface

Hoʻopau me ke akahele: e ʻike mua kā mākou poʻe ʻenehana loea ʻo ke ala wale nō e pale aku ai i kahi hopena maikaʻi ʻole ʻo ka manaʻo ʻana i ka pono o ka lawelawe kūikawā a me ka hana ʻana i nā hana kūpono e hōʻoia i ka hana pono a me ka pololei.


- Ua ʻōlelo ʻo T Nā Uku Hoʻonui Hermal

Maʻa i ka hana ʻana i nā mea like ʻole, hiki i ka abis ke nānā i ka hui ʻana e hōʻoia i ke kūpono.a laila mālama i ka hilinaʻi lōʻihi o ka cte (coefficient of thermal expansion), me ka cte haʻahaʻa, ʻoi aku ka liʻiliʻi o ka pale ʻana i nā lua mai ka hoʻololi pinepine ʻana o ke keleawe e hoʻopili ai i nā pilina o loko.


- Ka hoʻonui ʻana

Hoʻonui ʻia ka mana ʻo Abis i ka circuitry e nā pākēneka i ʻike ʻia i ka kali ʻana i kēia nalowale i hiki ai i nā papa ke hoʻi i ko lākou mau ana i hoʻolālā ʻia ma hope o ka pau ʻana o ka pōʻai lamination.no hoi, ka hoʻohana 'ana i ka baseline scaling paipai 'ana i ka hui 'ana me i loko o ka hale helu kaʻina hana hoʻomalu 'ikepili, e dial-i ka unahiʻole mea e e kūlike i ka manawa i loko o kēlā wahi manufacturing.

 

- Mīkini

Ke hiki mai ka manawa e kūkulu ai i kāu pcb, e ʻike pono ʻoe e koho i nā lako kūpono a me ka ʻike e hana pono ai i ka hoʻāʻo mua.






Puke a me ka lawe ʻana


ʻAʻole hoʻāʻo wale ʻo ABIS CIRCUITS Company e hāʻawi i nā mea kūʻai aku i kahi huahana maikaʻi, akā e hoʻolohe pū i ka hāʻawi ʻana i kahi pūʻolo piha a palekana.Eia kekahi, hoʻomākaukau mākou i kekahi mau lawelawe pilikino no nā kauoha āpau.


-Paʻi maʻamau:

  • PCB: ʻeke i hoʻopaʻa ʻia, ʻeke Anti-static, pahu pahu kūpono.
  • PCBA: ʻeke ʻeke antistatic, ʻeke anti-static, pahu pahu kūpono.
  • Hoʻopili pilikino: E paʻi ʻia ka pahu pahu ma waho i ka inoa o ka helu o ka mea kūʻai aku, hōʻailona, ​​​​pono ka mea kūʻai aku e kuhikuhi i ka huakaʻi a me nā ʻike ʻē aʻe.

- Manaʻo hoʻouna:

  • No ka puʻupuʻu liʻiliʻi, ʻōlelo mākou e koho ma Express a i ʻole lawelawe DDU ke ala wikiwiki loa.
  • No ka pūʻolo kaumaha, ʻo ka hopena maikaʻi loa ma ke kaʻa kai.



ʻŌlelo Pāʻoihana
- ʻAe ʻia nā ʻōlelo hoʻouna
FOB, CIF, EXW, FCA, CPT, DDP, DDU, Hoʻouna Hōʻike, DAF


-- ʻAe ʻia ke kālā uku
USD, EUR, CNY.


- ʻAno uku ʻae ʻia
T/T, PayPal, Western Union.


Kuhikuhi mai ABIS

No ka hōʻoia ʻana i kahi ʻōlelo kūpono, e hoʻokomo i kēia ʻike no kāu papahana:

  • E hoʻopiha i nā faila GERBER me ka papa inoa BOM
  • Ka nui
  • manawa huli
  • Nā Koina Panelization
  • Pono Mea
  • Hoʻopau i nā koi
E hāʻawi ʻia kāu ʻōlelo maʻamau i nā hola 2-24 wale nō, ma muli o ka paʻakikī o ka hoʻolālā.

E ʻoluʻolu e hoʻomaopopo iā mākou no nā mea hoihoi!

Manaʻo ʻo ABIS i kāu kauoha ʻoiai ʻo 1 ʻāpana!



Waiho i kahi memo

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Kuleana kope © 2023 ABIS CIRCUITS CO., LTD.Mālama ʻia nā kuleana a pau. Mana e

Kākoʻo ʻia ka pūnaewele IPv6

luna

Waiho i kahi memo

Waiho i kahi memo

    Inā makemake ʻoe i kā mākou huahana a makemake ʻoe e ʻike i nā kikoʻī hou aku, e ʻoluʻolu e waiho i kahi leka ma aneʻi, e pane mākou iā ʻoe i ka wā hiki iā mākou.

  • #
  • #
  • #
  • #
    Hōʻano hou i ke kiʻi