other
Blog
Home Blog

Blog

  • How to Select the PCB Material for Your Design
    • January 30. 2023

    The advent of 5G cellular communication networks has sparked discussion about building fast digital circuits all around the world. Engineers are searching for the best ways to transmit signals and frequencies through the current standard materials for printed circuit boards (PCBs). The goal of all PCB materials is to transmit electricity and provide insulation between copper conducting layers. The...

  • How to Choose the Right PCB Manufacturer
    • January 04. 2023

    How to Choose the Right PCB Manufacturer It is not always simple to select the best manufacturer for a printed circuit board (PCB). After developing the design for the PCB, the board must be manufactured, which is typically done by a specialist PCB manufacturer. Choosing the right PCB manufacturer can make the process much easier, but choosing the wrong one can cause a lot of problems. Depending o...

  • Certificates of Printed Circuit Board
    • December 16. 2022

    As we all know, PCB, as the mother of the electronics industry, is very important to electronic products, especially high-layer boards, which are mostly the main control boards of some important equipment. Once there is a problem, it is easy to cause huge losses. Then, when choosing a foundry When processing high-layer boards, how to determine whether a PCB board factory has the qualifications for...

  • Rigid PCB vs. Flexible PCB
    • December 07. 2022

    Rigid PCB vs. Flexible PCB Both rigid and flexible printed circuit boards are types of printed circuit boards. The rigid PCB is the traditional board and the foundation upon which other variations arose in response to industry and market demands.  Flex PCBs revolutionized PCB fabrication by adding versatility. ABIS is here to help you learn about rigid vs. flexible PCBs and when it's better t...

  • Surface finish of PCB board and its advantages and disadvantages
    • December 01. 2022

    With the continuous development of electronic science and technology, PCB technology has also undergone great changes, and the manufacturing process also needs to progress. At the same time each industry on the PCB board process requirements have gradually improved, such as cell phones and computers in the circuit board, the use of gold, but also the use of copper, resulting in the advantages and ...

  • Material and Stack up for Flex PCB
    • November 03. 2022

    1,铜箔基材CCL (FPC Copper Clad Laminate) It is composed of three layers of copper foil + glue + substrate. In addition, there are also non-adhesive substrates, that is, a combination of two layers of copper foil + substrate, which is relatively expensive and suitable for For products that require more than 10W times of bending life. 1.1 Copper foil In terms of materials, it is divided into rolled copp...

  • How to avoid printed circuit board warping?
    • October 25. 2022

    How to avoid printed circuit board warping 1. Reduce the effect of temperature on board stress Since [temperature] is the main source of board stress, as long as the temperature of the reflow oven is lowered or the speed of the board heating and cooling in the reflow oven is slowed down, the warpage of the PCB can be greatly reduced. However, other side effects may occur, such as solder shorts. 2....

  • 10 characteristics of high reliability PCB
    • September 28. 2022

    10 characteristics of high reliability PCB, 1. 20μm hole wall copper thickness of Printed circuit board,  Benefits: Enhanced reliability, including improved z-axis expansion resistance. Risks of not doing so: blow holes or outgassing, electrical connectivity issues during assembly (separation of inner layers, breakage of hole walls), or possible failure under load conditions in actual use. 2....

  • COB
    • August 15. 2022

    Since COB does not have a lead frame of IC package, but is replaced by PCB, the design of PCB pads is very important, and Finish can only use electroplated gold or ENIG, otherwise gold wire or aluminum wire, or even The latest copper wires will have problems that cannot be hit. PCB Design Requirements for COB 1. The finished surface treatment of the PCB board must be gold electroplating or ENIG, a...

Copyright © 2024 ABIS CIRCUITS CO., LTD. All Rights Reserved. Power by

IPv6 network supported

top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #
  • #
    Refresh the image