-
Several Basic Factors Affecting Electroplating Hole Filling Process in PCB Production
The output value of the global electroplating PCB industry has grown rapidly in the total output value of the electronic component industry. It is the industry with the largest proportion in the electronic component subdivision industry and occupies a unique position. The annual output value of electroplating PCB is 60 billion US dollars. The volume of electronic products is becoming more and more...
-
PTH of Printed Circuit Board
The base material of the circuit board of the electro-acoustic PCB factory only has copper foil on both sides, and the middle is the insulating layer, so they do not need to be conductive between the Double sides or multi-layer circuits of the circuit board? How can the lines on both sides be connected together so that the current flows smoothly? Below, please see the electroacoustic PCB manufactu...
-
High-precision circuit board technology
High precision circuit board refers to the use of fine line width/spacing, tiny holes, narrow ring width (or no ring width), and buried and blind holes to achieve high density. And high precision means that the result of "thin, small, narrow, thin" will inevitably bring high precision requirements, take the line width as an example: O. 20mm line width, according to the regulations to produce O. 16...
-
Black PCBs are Better than Green?
First of all, as a printed circuit board, PCB mainly provides interconnection between electronic components. There is no direct relationship between color and performance, and the difference in pigments does not affect the electrical properties. The performance of the PCB board is determined by factors such as the material used (high Q value), wiring design, and several layers of t...
-
How to figure out a good PCB board?
The rapid development of the mobile phone, electronics, and communication industries promoted the continuous growth and rapid growth of the PCB circuit board industry. People have more requirements for the number of layers, weight, precision, materials, colors, and reliability of components. However, due to fierce market price competition, the cost of PCB board materials is also on a rising t...
-
Introduction to plasma processing on PCB boards
With the advent of the digital information age, the requirements of high-frequency communication, high-speed transmission, and high-confidentiality of communications are becoming higher and higher. As an indispensable supporting product for the electronic information technology industry, PCB requires the substrate to meet the performance of low dielectric constant, low media loss factor, high-temp...
-
Shelf life of PCB? Baking time and temperature?
The storage time of PCB, and the temperature and time of using industrial oven to bake PCB are all regulated by the industry. What is the shelf life of PCB? And how to determine the baking time and temperature? 1. The specification of PCB control 1. PCB unpacking and storage (1) The PCB board can be directly used online within 2 months of the manufacturing date of the sealed and unopened PCB board...
-
Printed Circuit Board| Via VS Pad
Vias in the circuit board are called vias, which are divided into through holes, blind holes and buried holes(HDI Circuit Board). They are mainly used to connect wires on different layers of the same network and are generally not used as soldering components; The pads in the circuit board are called pads, which are divided into pin pads and surface mount pads; pin pads have solder holes, which are...
-
Impedance Control Testing of PCB Board
TDR testing is currently mainly used in battery circuit board manufacturers' PCB (printed circuit boards) signal lines and device impedance testing. There are many reasons that affect the accuracy of TDR testing, mainly reflection, calibration, reading selection, etc. Reflection will cause serious deviations in the test value of the shorter PCB signal line, especially when the TIP (probe) is used ...
Englishen
