other
Search
Home Search

  • Black PCBs are Better than Green?
    • April 22. 2022

    First of all, as a printed circuit board, PCB mainly provides interconnection between electronic components. There is no direct relationship between color and performance, and the difference in pigments does not affect the electrical properties.  The performance of the PCB board is determined by factors such as the material used (high Q value), wiring design, and several layers of t...

  • High-precision circuit board technology
    • May 05. 2022

    High precision circuit board refers to the use of fine line width/spacing, tiny holes, narrow ring width (or no ring width), and buried and blind holes to achieve high density. And high precision means that the result of "thin, small, narrow, thin" will inevitably bring high precision requirements, take the line width as an example: O. 20mm line width, according to the regulations to produce O. 16...

  • PTH of Printed Circuit Board
    • May 10. 2022

    The base material of the circuit board of the electro-acoustic PCB factory only has copper foil on both sides, and the middle is the insulating layer, so they do not need to be conductive between the Double sides or multi-layer circuits of the circuit board? How can the lines on both sides be connected together so that the current flows smoothly? Below, please see the electroacoustic PCB manufactu...

  • Several Basic Factors Affecting Electroplating Hole Filling Process in PCB Production
    • May 16. 2022

    The output value of the global electroplating PCB industry has grown rapidly in the total output value of the electronic component industry. It is the industry with the largest proportion in the electronic component subdivision industry and occupies a unique position. The annual output value of electroplating PCB is 60 billion US dollars. The volume of electronic products is becoming more and more...

  • How to know pcb layer?
    • May 25. 2022

    How is the circuit board of the PCB factory made? The small circuit material that can be seen on the surface is copper foil. Originally, the copper foil was covered on the entire PCB, but part of it was etched away during the manufacturing process, and the remaining part became a mesh-like small circuit. .   These lines are called wires or traces and are used to provide electrical connections...

  • Material and Stack up for Flex PCB
    • November 03. 2022

    1,铜箔基材CCL (FPC Copper Clad Laminate) It is composed of three layers of copper foil + glue + substrate. In addition, there are also non-adhesive substrates, that is, a combination of two layers of copper foil + substrate, which is relatively expensive and suitable for For products that require more than 10W times of bending life. 1.1 Copper foil In terms of materials, it is divided into rolled copp...

  • A Closer Look at Printed Circuit Boards (PCBs): The Backbone of Modern Electronics
    • July 13. 2023

    A Closer Look at Printed Circuit Boards (PCBs): The Backbone of Modern Electronics Introduction: In the realm of modern electronics, printed circuit boards (PCBs) are the unsung heroes that enable our devices to function seamlessly. These compact and intricate boards are at the heart of almost every electronic gadget we use, from smartphones and laptops to medical equipment and automotive systems....

    A total of

    4

    pages

Copyright © 2024 ABIS CIRCUITS CO., LTD. All Rights Reserved. Power by

IPv6 network supported

top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #
  • #
    Refresh the image