1,铜箔基材CCL (FPC Copper Clad Laminate)

Ya ƙunshi yadudduka uku na foil na jan karfe + manne + substrate.Bugu da kari, akwai kuma wadanda ba mannewa substrates, wato, hade da biyu yadudduka na jan karfe foil + substrate, wanda yake da in mun gwada da tsada da kuma dace da.
Don samfuran da ke buƙatar fiye da lokutan 10W na rayuwar lanƙwasawa.

1.1 Rufin tagulla
Dangane da kayan, an raba shi zuwa tagulla na birgima (Rolled Anneal Copper Foil) da jan ƙarfe na lantarki (Electrodeposited Copper).
Foil), dangane da halaye, kayan aikin injiniya na jan ƙarfe da aka yi birgima sun fi kyau, kuma ana amfani da yawancin jan ƙarfe na birgima lokacin da ake buƙatar sassauci.kauri
Don 1/30Z.1/20Z.10Z.2OZ da sauran nau'ikan guda hudu.

1.2 CCL
Dangane da kayan, an raba shi zuwa Fim ɗin PI (Polyamide) da Fim ɗin PET (Polyester).Farashin PI ya fi girma, amma ta
Yana da mafi kyawun juriya na harshen wuta, kuma farashin PET yana da ƙasa, amma ba ya jure zafi.Don haka, idan akwai buƙatar walda, yawancinsu suna amfani da kayan PI.Gabaɗaya cikin kauri
1/2mil, 1mil, 2mil.

1.3 M
Gabaɗaya akwai nau'ikan manne guda biyu: Acrylic (acrylic glue) da Epoxy (epoxy glue).Mafi yawan amfani shine mannen Epoxy.kauri
0.4 ~ 2mil suna samuwa, gabaɗaya ana amfani da manne mai kauri 18um.

2, Fim din rufewa
Fim ɗin murfin ya ƙunshi kayan tushe + manne, kuma an raba kayan tushe zuwa PI da PET.Kauri daga 0.5 zuwa 1.4mi.

3, Tafiyar Abubuwan ƙarfafawa)
3.1 Aiki: Don ƙulla sassa a cikin yanki na katako mai laushi, ƙara ƙarfafawa don shigarwa da ramawa ga kauri na katako mai laushi.
3.2 Abu: PI/PET/FR4/SUS
3.3 Hanyar haɗuwa:
PSA (Adhesive Sensitive Adhesive): nau'in matsi mai mahimmanci (kamar jerin 3M)
Saitin thermal: Thermosetting (ƙarfin haɗin gwiwa, juriya mai ƙarfi, juriya mai zafi, juriya mai raɗaɗi)

4, Single Flex PCB, Double Flex PCB, Multi Flex PCB

4.1 Gefe guda ɗaya

4.2 gefe biyu

4.3 Haɗin allo

4.4 Tsarin sassaka

4.5 Multilayer

4.6 Flex Rigid PCB

Idan kowace tambaya, don Allah RFQ .